2025 cannot find the front camera view with the tire guide graphics

[Woodsy15]

Have seen pictures and videos of tire tracking graphics when in rock crawl etc. On my 25 I do not have them at low speed in rock crawl nor in off road modes on the front camera. Tried split screen and tried front cam full screen. Should they be there??

 

[CAMDENN]

Have seen pictures and videos of tire tracking graphics when in rock crawl etc. On my 25 I do not have them at low speed in rock crawl nor in off road modes on the front camera. Tried split screen and tried front cam full screen. Should they be there??

I’m not saying this is the case but perhaps said feature was deleted on the 2025 model.
Did you check via the owners manual?

 

[Woodsy15]

The what?


Will take a look I guess.....;-)

 

[b-real]

On pre '25 models they show up when in Rock Crawl mode. I dont believe there is a way to even turn them off

 

[Aandrews109]

If you haven’t done so, go to “Features / Driver Assistance / Camera. On my ‘23 there is an option to turn On or Off both the front and rear camera lines.

 

[b-real]

I don’t have “Cameras” under Features - Driver Assist. I have front/rear park aids, but that is for the sensors, not the guide lines

 

[Aandrews109]

I don’t have “Cameras” under Features - Driver Assist. I have front/rear park aids, but that is for the sensors, not the guide lines

My bad. Went back and mine shows the same thing.

Went back out and did some more searching. Didn't find options to turn Cameras "ON" or "OFF."

The Front Grid lines show up in Mud/Ruts & Rock Crawl Modes automatically on mine.

Did some Google Searching and it appears that the '25 should have the same features.

 

[Wile_Coyote]

That's strange. I've done a fair bit of spicy offroading in the mountains and I just switch it to off-road mode and the camera automatically appears. I don't think I changed any settings at all.

Mine is a 24 though

 

[ihc]

On my 24 Tremor 401A they show up automatically in Crawl mode. You can also turn then on by pressing the "+" on the 360 view, then touch the front highlighted area. It turns off automatically after only 6mph or so. See pics.

 

[CMar]

Have you gone into 4 low? I imagine rock crawl mode is 4 lo, but haven't tried it myself.

 

[Big Cam]

There is a forscan setting where can enable the front camera at speed for modes like snow or rock crawl mode. It's kind of trippy going 30 in snow mode with the camera on, almost a little disorienting.

 

[Woodsy15]

On my 24 Tremor 401A they show up automatically in Crawl mode. You can also turn then on by pressing the "+" on the 360 view, then touch the front highlighted area. It turns off automatically after only 6mph or so. See pics.View attachment 40993View attachment 40994

Confirmed this! Thanks ihc. Looks like a change for 25' the lines only show when you zoom into the front from the 360 view. They actually show all the time in any drive mode when you select front zoom. They do not show up for Rock Crawl with the full front cam. Would like to see them on the larger full front cam view but I guess that's they way it is now :-(