2025 Tremor with 402A package- drive modes

[Beachroamer77]

My truck shows 7 drive modes: Normal, Slippery, Off Road, Tow/Haul, Eco, Sport and Rock Crawl. In terms of driving on the beach I researched what 4WD mode was best and discovered 2 other modes I believe my truck should have- Deep Snow/Sand and Mud/Ruts. Can anyone with a 2025 Tremor with the 402A package confirm if they do/do not have the Deep Snow/Sand and Mud/Ruts mode? Thanks.

 

[ThunderClap]

My 2025 402A does NOT have those two modes and has the same modes yours shows.

 

[broncobuster]

Really 4 wheel drive high and low is all you need...What can the transfer case or a computer really do for deep snow or mud ? You lock the rear axle...the Torsen works automatically in the front and you have maximum traction. And for sand...Air tires down to 12 psi and you can go anyplace with some throttle and those 2 diffs working .

 

[Rabidtastic]

Most of the beaches even on Gulf coast you should be fine with 4A but if it's a looser beach or you havent done sugar sand before 4H is the ticket. Usually with beaches I do 25psi so I can swap to hard road without having to air up and down constantly (or lower, you'll just have to air up if you're driving for lunch or something)

Mud around here is kindve a mixed bag...I dont really like the Grabbers in our thicker shit if its got any depth to it or water with known loose or unknown bottom.

 

[Beachroamer77]

My 2025 402A does NOT have those two modes and has the same modes yours shows.

Thanks for the confirmation. Asked my local ford dealer a week ago and still have not received a definitive answer. I did my own research comparing what my truck shows to Fords manual and to what Fords customer service said- see attached; no consistency.

 

[TexasTea]

Yet another tremor downgrade from Ford!

 

[ApolloChurchill]

Mud/Ruts and Deep Snow/Sand was replaced by Off Road basically. They did add some calibration as well that gives Off Road mode an option to view of the front wheels with the cameras in the mirrors. Something I’m jealous of and have been meaning to give a shot of enabling with ForScan successfully. It’s been something I couldn’t get to work even with correct settings however spelling out why the modes are different has me thinking that may be the difference and if I can enable Off Road for the SDM maybe it’ll work.