What's new

Attica 4X4 front Bumper

Cblaxx19

Well-known member
Tremor of the Month 🏆
Joined
Mar 4, 2022
Messages
1,082
Reaction score
2,146
Location
Jupiter
Current Ride
‘21 Leadfoot Grey 402A Tremor
Anyone have any experience with Attica 4X4?

came across their new F150 bumper on instagram and i like the overall look of it. it's also fairly wallet friendly compared to other options i've seen.

 

Attachments

  • 1723576217373.webp
    1723576217373.webp
    104.3 KB · Views: 436
  • 1723576245228.webp
    1723576245228.webp
    141.6 KB · Views: 385
They fail to mention if you need an intercooler relocate to install a winch.. I would assume that you do though.

I like their rear bumper even more than the front too
 
They fail to mention if you need an intercooler relocate to install a winch.. I would assume that you do though.

I like their rear bumper even more than the front too
i also like the rear bumper, but im not sure it'll work with our rear exit exhausts.
 
Ordered the front bumper, and it shipped today! Hope to see it this weekend!

I'm thinking of color matching the wings. Does anyone think that would look dumb?
 
1000021576.webp
seems legit! No ACC relocation tho, so that's something else to buy
 
Getting some lights ready to go, a little frustrated that I couldn't seem to squeeze in 3 lights per wing, maybe I'll try again later 🤷‍♂️
 

Attachments

  • 20240826_165636.webp
    20240826_165636.webp
    206.2 KB · Views: 86
  • 20240826_171640.webp
    20240826_171640.webp
    238.3 KB · Views: 87
  • 20240826_172001.webp
    20240826_172001.webp
    510.4 KB · Views: 87
Getting some lights ready to go, a little frustrated that I couldn't seem to squeeze in 3 lights per wing, maybe I'll try again later 🤷‍♂️
You could do an SSC1 pod, they are brighter than the SSC2 pods and cheaper!!
 
You could do an SSC1 pod, they are brighter than the SSC2 pods and cheaper!!
I considered that, however, when i fit the wings to the main bumper i found that as they sit in the wings in those pictures you can only see about half of the ss3 looking at it straight on as it would sit on the truck, thus blocking a good chunk of output. Which was a bummer since a 3, 2, 1 setup would be quite unique!

I had to push the lights all the way against the outside of the slots to get them visible facing forward. I guess if you really wanted to, you could fit in all 3 if you didn't mind the light shooting out to the sides rather than forward...it's hard to explain the balancing act of width spacing and the angle forward. ill send another picture once i get home from work
 
How do they leave the crash bars in the photo? They lack commitment!
Just going to throw this here for others -

In the case you want to retain your Crashbars and add a non OE bumper, all while keeping them hidden, you can remove the bars, put right on left, left on right and turn them upside down. This will cause them to curve up, not down.
 

Attachments

  • 20240828_170702.webp
    20240828_170702.webp
    445.7 KB · Views: 78
Can you move them up?
Like angle the lens up or the entire pod? I have plenty of room for angular adjustment, but the pod height is set in stone. The ss2 is on a 1/2" spacer so that I can actually get some use out of it, the second pod mount has a step down
 
Like angle the lens up or the entire pod? I have plenty of room for angular adjustment, but the pod height is set in stone. The ss2 is on a 1/2" spacer so that I can actually get some use out of it, the second pod mount has a step down
Ah, I might up and down not angle. That’s kinda a bummer.
 
Paint arrived today! Time to start getting this thing going
 
Back
Top