High-End Custom Tremor Stereo Upgrade

[SoundsGoodStereo]

Equipment Details:

Factory Radio of course

Source Integration: Nav-TV Zen A2B
Speaker Interface: APH-FD02
Front Speakers: Focal Flax PS165F3E 3-Way Components in custom A-Pillars
Front Door Plates: Ten87 Design Block Off Plates
Front Speaker Adapters: Ten87 Design
Rear Speakers: Focal Flax PC165FE Coaxials
Front Speaker Amplifier: Mosconi 100.6 One Series
Subwoofer Amplifier: Mosconi 1000.1 One Series
Rear Speaker Amplifier: Mosconi Pico 2
Amplifier Rack: Ten87 Design
RCA Cables: Custom made Straight Wire Cables
Sound Treatment: BlackHole MAT 3-Layer CLD + SQL Audio Soundwave Closed Cell Foam Rings
Backwave Control: BlackHole Tiles (144 Total Tiles)
Electrical: Full-Length Power + Ground iConnects 1/0 Gauge into two Distribution Blocks
Subwoofer: One 10-inch Focal K2 Power E25KX
Custom Enclosure: Vented tuned to 33hz, factory fit and finish with laser etched RGB lighting with the Tremor logo

All of this was tuned utilizing the Mosconi 8to12 Aerospace DSP.

Any questions, post below!

 

[Cranbery]

Killer setup. ~$5-$7k labor and materials?

 

[JPO]

Oh, so when you said "High-end", you meant HIGH-END!!! That's pretty awesome! I'm scared to know how much it cost.

 

[SoundsGoodStereo]

Killer setup. ~$5-$7k labor and materials?

If this was a one-off, that is about right. We do so many of these that our "labor" is blended into the package itself. So this package, but with the upgraded amplifiers (Two Mosconi Pro 5/30 ) is $14,974.13 installed.

 

[SoundsGoodStereo]

Oh, so when you said "High-end", you meant HIGH-END!!! That's pretty awesome! I'm scared to know how much it cost.

Thanks! I posted the price above as I know everyone gets curious on these crazy builds.

 

[Cranbery]

If this was a one-off, that is about right. We do so many of these that our "labor" is blended into the package itself. So this package, but with the upgraded amplifiers (Two Mosconi Pro 5/30 ) is $14,974.13 installed.

Wild. Not something I'd put into a tremor personally, but either way you guys did an incredible job. What city are you out of?

You do the custom enclosures in house also? Very high quality work, kudos to you and your team.

 

[SoundsGoodStereo]

We are located in the Nashville, TN area, but most of these trucks we do at our facility are shipped to us from across the country. Other than that, we ship this exact package which is more of what we do

 

[JPO]

Sign him up for "Stereo Of The Month"!!!

 

[ChsTremor]

We are located in the Nashville, TN area, but most of these trucks we do at our facility are shipped to us from across the country. Other than that, we ship this exact package which is more of what we do

Reckon I can check this truck out on my way back to South Carolina after I pick up my rig from Granger? That looks awesome and I'm sure it sounds better.

What is your solution to the rear window rattle? Hell, it rattles with the stock system from what I've heard.

 

[SoundsGoodStereo]

Reckon I can check this truck out on my way back to South Carolina after I pick up my rig from Granger? That looks awesome and I'm sure it sounds better.

What is your solution to the rear window rattle? Hell, it rattles with the stock system from what I've heard.

We add a 3-layer CLD sound treatment along with our strong amplifier rack using the three mounting points to the rear wall which reduces the resonant frequency of the back wall. This helps with 85% of the potential for the rattle. It's actually not common in every truck which is weird, but we have experienced it in a few trucks.

 

[WeinerMobile]

We are located in the Nashville, TN area, but most of these trucks we do at our facility are shipped to us from across the country. Other than that, we ship this exact package which is more of what we do

I followed your Gen2 Raptor build and like your work. I knew in a few months of ownership that I wouldn't keep the Raptor long so I never inquired before.

I'm in Nashville and have been a Hi-Fi Buys guy since Phoenix Gold was the standard.

I was thinking about doing a (much less significant) upgrade to my 2022. When you have time shoot me a message and maybe we can connect on a system for my truck.

 

[SoundsGoodStereo]

I followed your Gen2 Raptor build and like your work. I knew in a few months of ownership that I wouldn't keep the Raptor long so I never inquired before.

I'm in Nashville and have been a Hi-Fi Buys guy since Phoenix Gold was the standard.

I was thinking about doing a (much less significant) upgrade to my 2022. When you have time shoot me a message and maybe we can connect on a system for my truck.

Awesome! Not sure I can send you a PM as we are not a paid vendor on this forum, but give me a call or send me a message, we can connect and make it happen for you.

 

[Bannerman]

If this was a one-off, that is about right. We do so many of these that our "labor" is blended into the package itself. So this package, but with the upgraded amplifiers (Two Mosconi Pro 5/30 ) is $14,974.13 installed.

That's a lot of doll hairs.

 

[TJE]

Holy Sh*t this is impressive!