Wheel well liner issue awareness

[Cblaxx19]

For those of you with the husky wheel well liners, check the your liners aren’t rubbing your shock covers!

I noticed that my passenger liner was rubbing my shock cover and wearing a hole in it. I caught it early enough and trimmed the liner to avoid further contact.

 

[Cranbery]

For those of you with the husky wheel well liners, check the your liners aren’t rubbing your shock covers!

I noticed that my passenger liner was rubbing my shock cover and wearing a hole in it. I caught it early enough and trimmed the liner to avoid further contact.

Get a real rear shock!

 

[Cblaxx19]

Get a real rear shock!

I can’t afford upgrades cause I’m dropping too much cash on lightbar development for all you peeps that want them

 

[Cranbery]

I can’t afford upgrades cause I’m dropping too much cash on lightbar development for all you peeps that want them

Alright alright, we accept your sacrifice!

 

[Grafx36510]

I can’t afford upgrades cause I’m dropping too much cash on lightbar development for all you peeps that want them

Throwin it down. I accept this reasoning.

 

[Brad99superd]

I can’t afford upgrades cause I’m dropping too much cash on lightbar development for all you peeps that want them

Good enough excuse for me!

 

[Cblaxx19]

Alright alright, we accept your sacrifice!

Throwin it down. I accept this reasoning.

Good enough excuse for me!

Additional reasoning being that I have twins due in a couple months and trying to prepare for that as well… I have zero free funds at the moment

 

[Brad99superd]

Additional reasoning being that I have twins due in a couple months and trying to prepare for that as well… I have zero free funds at the moment

Well congradulations sir!!!!

 

[Grafx36510]

Congratulations!! I only have one who is now a teenager and my employee. You need help, just reach out.

 

[Cblaxx19]

Congratulations!! I only have one who is now a teenager and my employee. You need help, just reach out.

My first just turned 2 in July. Jumping the 3 is gonna be an adventure for sure!

 

[Grafx36510]

Trust me, when they’re that young they’re great. When they’re older it’s great. Once you’re the dad AND the boss, it gets challenging.

 

[Cheif2Slo]

As a Dad I’m always the Boss!

 

[Grafx36510]

VERY TRUE. However, he actually is my employee. After school and during the summer. It’s a totally different skill set.

 

[Cheif2Slo]

VERY TRUE. However, he actually is my employee. After school and during the summer. It’s a totally different skill set.

Oh I can only imagine!

 

[Grafx36510]

Mums the word… he’s actually impressed me as division GM and he impressed the company CEO, so I guess he’s good… He never interviewed with me. I made him long form apply and interview last year. I have to say I’m proud of the human beanstalk.

 

[Docthor]

Did you just order the base husky liners? On their website when I put the tremor in it says that it might not fit correctly. Just got a call my tremor is in so I’m trying to buy everything I need

 

[apeddie]

I noticed the same issue with mine but did not realize the boot was plastic. Thanks for pointing out the possibility of the wheel well liner rubbing through. Luckily it had not got to that point but you can certainly see the wear marks. Used a Dremel tool on it today and trimmed it back. Hopefully the issue is solved, will keep an eye on it

 

[ksheldon63]

I have the husky liners and trimmed an angle when I first installed them. I just installed the Halo kit so the stock rears came off and there's quite a bit of rubbing from somewhere but it doesn't really make sense. It's on the lower portion with the Tremor Logo
Edit: Maybe from the plastic dust boot going up and down. Biased to one side and rubs.

Could it really be from the liner that low?

 

[Aliass24]

I have the husky liners and trimmed an angle when I first installed them. I just installed the Halo kit so the stock rears came off and there's quite a bit of rubbing from somewhere but it doesn't really make sense. It's on the lower portion with the Tremor Logo
Edit: Maybe from the plastic dust boot going up and down. Biased to one side and rubs.
View attachment 15442

Could it really be from the liner that low?
View attachment 15443

View attachment 15444

You sure those marks were not there when you first installed because I don’t see how it could be rubbing on anything.

Sorry just noticed you meant the stockers, that’s from the dust shield going up and down. That’s totally fine.

 

[ksheldon63]

You sure those marks were not there when you first installed because I don’t see how it could be rubbing on anything.

Sorry just noticed you meant the stockers, that’s from the dust shield going up and down. That’s totally fine.

Yeah thanks for confirming. Didn't want the freshy Halos to get wear marks if it was from something else.