What have you done to your F150 Tremor this week?
Put the F150LEDs Sentinel LED Tailgate bar on and working on new logo designs for the ol youtube channel.
Put the F150LEDs Sentinel LED Tailgate bar on and working on new logo designs for the ol youtube channel.
Finally got around to installing the 1.5” leveling kit on my ‘22. Factory tires were also toast at 52k so I put on some Toyota RT Trails 285/75r18. I love it made a huge...
Sold it. Bittersweet but I went with a 2026 platinum pb this time. If they make a Tremor with the powerboost, I'll be trading in the platinum. It was tough to pass up on the...
The votes are in for October’s F-150 Tremor of the Month contest! Five great entries and 40 votes later, @Dunc takes home the win with a photo of his Tremor getting its wheels clean before another...
I decided to put a little tool kit together after seeing the Ford kit. I wanted to keep the good tools in the garage and put together something adequate for some problems on the trail. I ran into...
Traded in my 2023 Agate Black Tremor for the 2026 Marsh Gray. Absolutely love the color and truck. Already did the leveling kit, tailgate letters badge flag & rear inner wheel liners.
I just checked and they're SP-596's. Rock Auto got it right! I watched a youtube, looks super simple. Unbolt/unplug the coil packs and swap them out. I did splurge on a $15 1-piece...
The votes are in for October’s F-150 Tremor of the Month contest! Five great entries and 40 votes later, @Dunc takes home the win with a photo of his Tremor getting its wheels clean before another...
Got a flat this morning You were very fortunate. Clearly you drove away just as a dangerous mental patient with a hook for a hand clawed at your tire. Did you hear any strange scraping or...
I finally did it..Exhaust Cutout. Sounds great !
@CHF1212 so now what does Bilstein say about the variance between advertised lift and your actual lift measurements? Clip Position #4 is supposed to be 0.5” lift and your actual measurement is...
Hello all, New to the forum and wanted to check in to say hello. In Aug I bought a 2026 Tremor (402a pkg w the 3.5) Anti-matter blue. Prior to that I owned a 2017 F150 Lariat SCREW 3.5 since...
Sorry for the delay with pictures, I have added spray in bed liner, tonneau cover, wheel well liners, flipped the running boards, stubby antenna, bed corner storage box. For the wheel well liners...
got the Builtright panels installed in the bed and under the back seats and put the emblems on the tailgate.
https://www.etsy.com/listing/1328529793/2021-2024-f150-fender-vent-flags-sold-in?ref=share_v4_lx Has Standard Flag & Distressed Flag.
Really like those flares - if you have any side views in the sun, would love to see some other angles. Wouldl Iike to get some on my Atlas Blue - deciding between Matte black vs. Glossy Black. Let me know if you want a different view...
Well semi productive today, adding a kit to the bed to contain some of my stuff and a bit of lighting
Not ideal conditions, but this is my pull from today. 21 tremor 402a with intake, intercooler, catted downpipes, corsa exhaust, 93 prx tune from mpt, using 94 octane fuel. 4.49...
Perfect - Now I just need to see what the high gloss ones look like! ;) Thanks bud! Perfect - Now I just need to see what the high gloss ones look like! ;) Thanks bud! Here you go
Added some nice but cheap bed lights.
We just got back from 4 months on the road exploring the NE this year. This combo has now been to 40 states. Love our country and this truck!
My Ford dealer changed the tranny fluid and filter at 50,000 miles. If you plan on keeping it, its a no brainer to me. I also did diff fluid change (4wd service) at 60,000 miles.
I assume you have pro power and not the 400w inverter? 2,ooo watts. it kicks ass.
The Ghost! Happy Haunted Halloween!🎃
I have a 2023 402A 3.5L Ecoboost at 48k and called my dealer asking when I need to do the transmission fluid service. She tells me 150,000 miles! Am I hearing that correctly??? My manual (didn’t...
2024+ Ford F-150 Tremor Modular Bumper - Fog Light Kit For the Tremor owners with the modular bumper, this kit is a complete replacement for the factory fog lights. Each shroud holds two PRO...
Well it's been a while since I've been able to do much of any updates on the truck, but after 2.5 years of relatively full-time volunteer work, I'm back to paid work (in addition to the volunteer...
After all that gets done I want to figure out some better storage solutions for the bed. Right now I have a lot of stuff to carry in there because I'm on call for responses and don't have time to...
SOLD---$1,800 OBO---Hickory, NC Area Set of 5 complete wheel-and-tire set * Original Ford factory dark gray Tremor wheels * General Grabber A/T tires * Tire size: 275/70R18 * Factory Ford center...
I have a 2023 and never had a problem
We took delivery of our 2026 Marsh Gray F150 5.0 Tremor yesterday. I had Corwin Ford install the Ford Performance Whipple Supercharger and tint the front windows. Next mods are Borla S Type Exhaust, Decked Bed System, BD 40" S8 lightbar...
Finally finished installing Diode Dynamics C2R reverse lights last weekend. Definitely ended up being more complicated that I originally thought. Copied the bracket design...
Finally made some changes to the truck. 3in ReadyLift level kit, 35x11.5 Falken Wildpeak RT, 2in Borne Off Road wheel spacers, SF1 fender flares from rough country.
Added some Diode Dynamics SSC2 pods in the rear for some more reverse lighting. Not sold on running the amber backlighting. I might cut that wire. Thoughts? I am the test mule for Axis...
Just stumbled across these forums even though I've had my '25 EB Tremor for almost a year now. I really haven't done much to it other than ceramic coating...but will likely change that in the not...
Glad you found the forum! Welcome! Have you done much to the BRZ? I've gone off the deep end on that one! Its a TT5 car so no interior from the b pillar back, I/H/E and E85 tune, big brakes...
Sunrise on the dry lake bed
I’ve now put a little over 3,000 miles on the Pirelli Scorpion XTM A/Ts in 295/70R18 and so far I’m pretty pleased with them. I’ve seen minimal, if any, loss in fuel economy compared with the...
This Saturday's project. TruShield Aluminum Retractable Tonneau Cover.
Kind of a different direction but technically a replacement of that decal.
New here, bought my truck a few months back. Just had a few things done and just got it back. I like seeing and learning everything everyone is doing with these trucks. 3in Readylift leveling...
Installed the grill lights.
Everyone is gonna have their own opinion on this topic. At the end of the day, it’s your truck…do want you want. I couldn't agree more. All the best too you.
...and putting in some work...
My son helped put the ADD Black Label rear bumper on. Happy to no longer have a dented bumper. Also, sound clip of the AWE exhaust with CVF downpipes.
Cleaning the wheels before another dusty day in Utah, heading into Cathedral Valley.
First Tremor is a 23, here is my to do and done list combined. Electric running boards✅ 3W mats all around✅ Add a Fit cam✅ Front row window tint✅ F150 tailgating in Black and...
My chainsaw is too small to cut this, that’s why I bought the V8
Got the XTM AT’s mounted yesterday, super impressed so far very responsive, ride is not harsh, zero road noise. They look amazing pictures don’t do these tires justice, tread depth is aggressive...
Have had my 2022 Tremor (antimatter blue) for over a year now, but new to Forum. Put a 2" level on it a while back and now looking at tires. Not a serious off-roader so I'm looking at HT tires in...
I don't think my joke landed You wood think people caught it. Maybe they logged off too soon. I saw dust from them leafing. 😂
@Cblaxx19 Did this ever come to fruition? I'd totally buy this. Even the plastic version looks nice. So I had a heck of a time getting a metal Product quoted at a reasonable price. DD also...
I have the 5.0 and I’ve yet to see these numbers. Closer I can get is about 16.5. Really missing my tuned and deleted Cummins haha
The day I brought it home! Two weeks ago I traded my bronco for what I had originally been considering when I bought my 4 door badlands. I never got past the allure and desire to get back into a...
Just hooked up a FITCAMX and installed my bed covermy bed cover
Fixed my issue with the tow hook covers this weekend. Two coats of AutomotiveTouchup Adhesion Promoter, three coats of AutomotiveTouchup Basecoat M7329A (2015 Ford Fiesta Electric Spice) and then...
I don't think my joke landed You didn’t yell timber.
no one wants to mess with someone splitting girthy logs with a tiny saw in the middle of the woods Don’t make me compensate even harder. Might have to pay whipple.com a visit later, if I’m...
Does next to an almost Tremor orange fence count?
Didn’t do this to or for the Tremor but I picked up a W211 E55 AMG I will be starting a restomod on. As such I need to be able to work under it so had this installed. The high lift garage door will be done this week.
Installed 6112/5160 combo, front set at clip #5, removed the Tremor rear block and replaced it with the FX4 rear block and u-bolts. Still have stock front control arms and it...
Installed 6112/5160s yesterday. Front 6112's are installed on the #4 circlip location which is about .5" lift from stock. It's pretty much level as is with my 250ish lbs of camper shell and rtt...
I just completed a 2300 mile round trip from my home in northern Colorado to Houston, TX. One issue that I found on this trip was not with the truck (it was fantastic), but with the fuel pumps at...
Update, Just got back from the second Ford dealership not long ago. Tech took the truck for a rip and noted the issue as the drivers side IWE. Once replacement parts arrive I will get a call to...
Installed the Compressor and control panel for the Uncoming air bags next week,Decided to use a small Pelican case to keep it out of the elements, and used the Storage compartment cover for the...
Received my running board letters and installed. Many thanks to Tufskinz and OP for putting this discount together.
I reversed the running boards on my truck. My wife came back to me, I found my dog, quit drinking and won the lottery. No, wait a minute. That all happened when I played country music...
The votes are in for the September F-150 Tremor of the Month contest! With four awesome entries and 40 votes cast, @Tremor 1 took the win with an awesome photo of his Tremor ready for work on a...
Just got some Scorpion 295’s on a couple hrs ago. Ride home was great
Stretching her legs ... Citrus WMA
Rumor has it they installed the back wheels on the front and vice versa 😬😂
Hey everyone, finally pulled the trigger this past Thursday and picked up a 2025 F-150 Tremor, 402A, EcoBoost V6 with only 6k miles and 1 owner. Been lurking here for a bit during the buying process (seriously, this forum saved me from...
What's up everyone, new to the forum and wanted to introduce myself. Looking forward to getting to know the community.
2022 F150 TREMOR 402A I moved to Prescott, AZ, a little over a year ago and have gotten the chance to take my truck off-road quite a bit to explore BLM land, the forests, and...
Finally got to try my setup out. Very happy with the results. The tent, the alu-cable with trail rax table slide, and a 10x10 canopy travel on the rack. When you get to camp, deploy canopy first...
New to the forum. I had the dealer do the Ford hard folding tonneau cover and ceramic tint on front driver and passenger windows when I picked it up a couple weeks ago. Did the rear wheel well...
We pull our Intech Sol Dusk with our 2025 Tremor. The trailer is small enough for towing long distances in a day and big enough to be comfortable at the destination. The only thing I wish it had...
While at the auto parts I got me an oil filter wrench or whatever its called. It’s a 76mm size for the motor oil filter in case anyone wants to know the size. I micrometer’d it to 75.6mm close...
Agreed. Love mine. Makes me smile every time I see them reflected off the car in fromt of me. @Cblaxx19 does great work!
Tires finally came in! Got em on this afternoon I will say they ride and feel great and are pretty meaty! It's been raining here for a cpl days so I will see how they perform at hwy speeds wet...
I just looked up tire rack specs for 295/70R18's and weight differences are insane: M/T Baja Boss A/T: 74 pounds BFG A/T K03: 65 pounds Perelli Scorpion XMT: 57 pounds So the perelli would save...
How are the tires? What size did you go with? I went with stock size 275's E load. Only been a couple days maybe 100 miles but I will say ride quality is smooth and responsiveness is awesome...
My son and his friend installed my 0FG AWE resonated exhaust. Louder than I thought it would be with the downpipes but fine none the less. The rear bumper goes on this weekend if I have time. I...
Great looking Tremor @S7vnty9 ! All the add ons and mods sound great ! My two favorite mods I have done to my truck are, #1 adding lighting( a pillar and bumper lighting), and 2nd and by far my...
Love the antimatter blue. I have a '25 Lariat with the 5.0 in the same color.
New to the forum. I had the dealer do the Ford hard folding tonneau cover and ceramic tint on front driver and passenger windows when I picked it up a couple weeks ago. Did the rear wheel well...
I just found this forum, it's just like being home! Ha! I've been a ford guy for a few decades, I just bought my 2026 marsh grey Tremor R. Before you rip me to shreds, it's how I bought it from Long MacArthur ford in Kansas. It's...
Took my truck to a custom exhaust shop and had a Borla Pro XS installed. Sounds perfect. Nice deep rumble. Here's a clip
@Kbar, I'm going to try the filter catch funnel and will take a picture of that and tell everyone if it works. I'm still a month out from an oil change. Yes there is a solution to the oil drain...
Yep and as said truck just cackles by whistling 700 hp with some cool add graphics and onlookers will say wow cool a Tremor R it won’t matter, oem or not. The effect will have landed.
Purchased the Pirelli Scorpion XTM AT at my local dealer 295/70/18 $404, buy 3 get 1 for 1$ deal, plus $80 instant rebate from Pirelli $1,137 for the rubber. Pirelli also had a $100 dollar mail in...
Interesting. didn't know a tremor R was an option. Is it oem or does someone flip them? There’s no “OEM” TREMOR R option. It’s nothing but additional parts that are installed by this specific...
Finally wore out the stocks....Eibach 2.0 and 295/70/18 Falkens. Love it so far. Obvious crash bar trim and mud flaps. Will keep folks posted. - Rob
Hmm, i wonder if there Good? rated overall #1 in this review.
Tremor is changing for 2027. https://www.edmunds.com/car-news/2027-ford-f150-carhartt-truck-debut-first-look.html
Wow! That sucks! Glad you're good! Looks like the truck did its job and come apart instead of you 👍
Beautiful truck. I did the LED license plate lights (inexpensive) and the orange front tow hooks as my first mods. The tow hook install can be done by yourself; it's just a little tricky because...
Did this today. Added Syneticusa Molle panels and Juggernaut straps. 😎…….Time for a trip to a LINE-X shop.
Well…no responses- but they certainly fit! I do have some minor rubbing on the factory molded flaps- which I am trimming to clear.
Picked her up today. Love the Antimatter blue. Wasn't too sure about the 3.5 but after driving it I think it'll be just fine. 402b came with everything I need. Added Tuxmat...
Installed TuxMat front and back. Love the look, not industrial looking like some of the others and fits great. Also some Rough Country under rear seat storage.
Added the Tremor Modular Bumper Grille Inserts :)...
Update FYI- Ford is doing buy 3 get 1 free tires (Perrellis are on the list) on the 15th this month. All discounts etc stack with the deal. So with an alignment ($119) this month thru Ford it...
After trying three cheap Chinese made alternatives from Amazon I paid out the ass and ordered a trio flatmount out of the USA to mount my starlink mini inside.
My 1.5" lift gave me 1.9"... I love it. Mine is at 1.25...and I absolutely love it too. No worries at all
I took these rock lights off my 19 RAM when trading it in. I was hoping I would be able to reuse them and yesterday was the day. I used the Starkey cargo light harness to get my power and ran that...
'25 here, ever since I installed the in-track window vents mine does it all the time. Reset it multiple times
It may have been mentioned- get Roadmaster Active Suspension HD- makes a world of difference.
Just to update this thread, I've ran 91 the last probably 20+ tanks. Fuel economy has increased and the 5.0 engine seems happy.
I took these rock lights off my 19 RAM when trading it in. I was hoping I would be able to reuse them and yesterday was the day. I used the Starkey cargo light harness to get my power and ran that...
has anybody had this issue? Hey, I had the same issue a few months ago. I messaged Cory and he said to swap the control units to see if that was the issue. Swapping the units actually fixed the...