FS: Ford 2021-2026 F150 Securicode Keypad Kit - NJ - $150 SOLD

[TheWaterman]

I am selling my Ford Securicode Keypad kit that includes the parts:

FL3Z-1520555-SG MOULDING (B-Panel LH, Driver, Gloss Black)
FL3Z-14A626-AH ACTUATOR (Key Pad)

I went to install on my 2026 F150 Tremor, only to find my door doesn't have the harness.

Parts are unused, factory Ford parts. Buyer pays shipping and local pickup is available if desired.

 

[COTremor]

Bummer man. GLWS. I’m going to check if I have this harness. My truck was built 12/2025. If I have it, is it behind the trim in the b pillar?

 

[T-Rob]

How do you figure out if you have the harness?

 

[TheWaterman]

Bummer man. GLWS. I’m going to check if I have this harness. My truck was built 12/2025. If I have it, is it behind the trim in the b pillar?

Mine was Feb 2026. Most 2025's have it. You just need to take 6 screws out of the door, pull the panel off, and look. You don't even need to peel back the vapor barrier. You should be able to see it through the film.

You probably have it but this is what it looks like if you have the harness:

Here is my truck without the harness, pretty obvious it's missing:

 

[TheWaterman]

How do you figure out if you have the harness?

See my response and here is a video on how to remove the door panel. It takes literally 10 min with a 7mm nut driver and small flathead screwdriver.

2:45 to 6:45

This guy does a little bit better job with the how to but neglects to show people the 2 screws on the bottom of the door:

You don't actually need to unhook the wires or anything like that to look. If the harness is there, you'll see it through the vapor barrier. At worst, just peel a small corner back to confirm.

 

[TheWaterman]

SOLD