Tremor Level Pic Thread

[mxvet]

has anyone had issues getting the steering wheel back to center after alignment? I had the ford dealer do the alignment after a 1.5" spacer add and they cannot get it back to 10 and 3 after 2 attempts. stuck closer to 10 and 4

 

[Aliass24]

has anyone had issues getting the steering wheel back to center after alignment? I had the ford dealer do the alignment after a 1.5" spacer add and they cannot get it back to 10 and 3 after 2 attempts. stuck closer to 10 and 4

I had that happen to me, I ended up sitting in my truck holding the steering wheel straight while they made the adjustments.

 

[FaKtor34]

I had that happen to me, I ended up sitting in my truck holding the steering wheel straight while they made the adjustments.

That should be how they do it, I guess the dealer doesn't understand that it has to be held in place to align it. Most use a bar to hold it while they do the adjustments.

 

[mxvet]

IDK, but I wasted 4 hours+ of my life on them trying to get it right.. I finally gave up and left. Trying a different dealer this afternoon.

 

[jthomp343]

has anyone had issues getting the steering wheel back to center after alignment? I had the ford dealer do the alignment after a 1.5" spacer add and they cannot get it back to 10 and 3 after 2 attempts. stuck closer to 10 and 4

No. Maybe check with an accredited 4x4 shop in your area that does lifts. They usually are better at alignments dealing with 4x4 lifted trucks more often.

 

[ETN]

Something I've also dreaded, with likely lift forthcoming. Truck tracks straighter than anything I've ever owned, from factory, and would hate to lose this.

 

[Fatkid55]

Did you use the stock front springs?

Yes

 

[mxvet]

That should be how they do it, I guess the dealer doesn't understand that it has to be held in place to align it. Most use a bar to hold it while they do the adjustments.

seemed to work this afternoon at 2nd ford dealer. thanks for the tip

 

[808 Tremor]

ICON suspension stage 3, added the Finned Resi up front after the fact. Front leveled about + 2-1/4. Stock rims and Tires currently. Have ICON Compression 18x9 +6 offset Rims w/ Ridge Grapplers 295/70/18. Will put back on soon. Added some previous pics.

 

[jdangel2]

2.5 RC monotube strut with 295/70 r18 yokohama g003

How are you liking the RC lift/level? I run lots of pothole and washboard gravel roads. Is the truck smoother over those? Or rougher?

TIA! Your truck is mint!!

 

[Killercat69]

How are you liking the RC lift/level? I run lots of pothole and washboard gravel roads. Is the truck smoother over those? Or rougher?

TIA! Your truck is mint!!

The truck is still as smooth as it was stock I even got load E rated tires cause i run alot of hardtop roads when traveling for work which they say takes away from the ride of the truck since they are a harder composite tire Im definitely satisfied with the leveling kit

 

[jdangel2]

The truck is still as smooth as it was stock I even got load E rated tires cause i run alot of hardtop roads when traveling for work which they say takes away from the ride of the truck since they are a harder composite tire Im definitely satisfied with the leveling kit

Did you drop the rear like the RC kit suggests?

 

[Killercat69]

Did you drop the rear like the RC kit suggests?

No I kept the rear stock which the rake is not noticeable unless you really look

 

[jdangel2]

No I kept the rear stock which the rake is not noticeable unless you really look

Thanks for the info!!

 

[RLJ111]

Did you drop the rear like the RC kit suggests?

If you use the blocks, the rear will sit lower than the front. I'm removing the blocks tomorrow.

 

[jdangel2]

If you use the blocks, the rear will sit lower than the front. I'm removing the blocks tomorrow.

What do you think about the ride?

 

[RLJ111]

What do you think about the ride?

I think it may ride a little better. The wife thought so too. When I get the blocks switched out tomorrow, I will let you know for sure.

 

[GRB.GEG]

View attachment 17012
Procomp 2.5” Lift, stocks wheels and tires.

What kind of money are we talking to just do this front lift? Thanks.

 

[Nickotine18]

What kind of money are we talking to just do this front lift? Thanks.

It cost me about $220 for the parts, i did the install but i would imagine it could be like another 200 bucks for labor.

 

[Burns363R]

Here is my 21. Stock , and then with a Stage 3 2.3" spacer level kit. Truck was 38" front and 41.75" to the center of the wheel well. After the level, it was 40.5 front and 41.75" rear.