🛠️ What have you done to your F150 Tremor this week?

[CAMDENN]

Did a taillight swap today! Put in the 2024-2025 LED tails because those thangs are BANGINView attachment 37867View attachment 37868

Super simple install. 2 lines in ForScan which are:

726-43-01 xxxx xxxx x4xx
726-43-02 x4x1 x1xx xxxx

Technically these have the option for the scales, but it seems like we would need to buy and install a VDM to make the scales work if you already have the height sensor in the back. Not sure the juice is worth the squeeze, at least not for me.

Nice.
Are those 24-25 TREMOR tail lights or a Lariat or higher trim level.

 

[Iconic5.0]

Nice.
Are those 24-25 TREMOR tail lights or a Lariat or higher trim level.

Both

 

[roxbury29]

Just curious but why do you wish that the OEM TREMOR wheels were 17”.
I mean outside of a little more sidewall on the tire, what else would one gain.

For me, I wanted more tire choices, better look, more sidewall, in the size tire I wanted it was also less expensive. Also, with an E rate tire and having more sidewall still gives you nice ride. Similar to jeep Rubicon, Raptors. Also I have 17x9's on my jeep and with 17's it even appears to be larger. Just overall better in every way, 17's are IMO the best size wheel for on or off the road. 18's are not horrible by any means.

 

[CAMDENN]

Both

Ahh so they’re the same.
Got it.
Looks good.

 

[DirtyBoots]

Thank you Lord!
Have blessed Easter to all
All I'm gonna say....

 

[FeeltheTremor]

Ford Performance Tune, Wheels, caliper covers, Mishimoto Dual PCV and CCV Air oil separator and front plate relocate.

 

[Nomis 1]

I made some rear end mods with the help of a complete stranger! Friday was my birthday, fam and I headed to a neighboring city to do a bit of shopping and have lunch. Just as I pulled away at a green light, bam, we got rear ended.....eff me!! Luckily everyone is okay, just a bit sore. I got tagged at relatively low speed (I think) by a Ford Escape but since it was square on my hitch and recovery hooks, we felt every bit of the impact. Pulled off the road, other driver was cool, just effed up and looked down for a second, shit happens, glad everyone is okay. Truck is a little beat up, will need a new bumper, bumper plastic parts, and a new hitch, otherwise, no body or frame damage as far as I can tell. Glad everyone is okay and the truck will be fixed!

 

[ErlichBachman]

I agree with you on the DD bulbs.
I think you'd be happy with the Philips 194 or Sylvania 194 license plate LED bulbs.
I purchased a pair of each back in 2023 and I have no complaints. They have gone up a little in price.
The Philips are $15.56 and the Sylvania’s are $14.75.
Both are on Amazon and the price for the Sylvania’s is a sale price which is 30% off.
I hope this helps you out.

much appreciated. will give these a shot.

 

[Aliass24]

much appreciated. will give these a shot.

I installed the sylvania 194’s about a year ago without any issue, although i did think the superbrite ones were a bit much so i went with the regular ones and are plenty bright.

 

[CAMDENN]

much appreciated. will give these a shot.

You’re welcome.
Here are a couple of screenshots of the ones I purchased off AMAZON.

 

[TexasTea]

Ford Performance Tune, Wheels, caliper covers, Mishimoto Dual PCV and CCV Air oil separator and front plate relocate. View attachment 37906View attachment 37907View attachment 37908

Report on the tune? Worth the coin?

 

[TexasTea]

I installed mine around the same time (end of March, start of April). Ride and handling are much improved on-road, off road is absolutely amazing!! The ass end does'nt break loose and get all sideways on washboards, big hits are super plush and smooth, landing from small, accidental jumps are fantastic! I cant believe the entire kit is 1500bucks, I did the work myself in about three hours, I added four turns to the coils to push the front up another 1/2", and had a high quality allignment done. My first towing experience with the new shock is in a week, I expect great results and less wallow in the rear with the Eibachs I DO NOT REGRET THIS DECISION!

How's the on road ride? I am worried I'm gonna pick something and lose my Cadillac soft smooth ride...

 

[Doatsofoats]

Picked up a 22 402a with 19k miles a few weeks ago. Added retractable bed cover, 15% ceramic tint on sides 5% on rear window, and 2” readylift level. Some before and afters of the level today!

 

[TexasTea]

Picked up a 22 402a with 19k miles a few weeks ago. Added retractable bed cover, 15% ceramic tint on sides 5% on rear window, and 2” readylift level. Some before and afters of the level today! View attachment 37949View attachment 37950

Looks great. Guess you don't drive at night tho!

 

[Doatsofoats]

Looks great. Guess you don't drive at night tho!

Thanks! Hahaha the rear window is definitely dark but not bad by any means on city streets. I usually go 15% all around but just wanted that rear window to be completely black

 

[Nomis 1]

How's the on road ride? I am worried I'm gonna pick something and lose my Cadillac soft smooth ride...

I love it! ass mentioned in all the reviews and info about the kit, it firms up the ride a bit and makes the truck a little more lively feeling. It still rides like a Caddy and after a few miles you wont know the difference, which is hardly noticeable in my opinion, from stock. Worth the money for sure!

 

[FeeltheTremor]

Report on the tune? Worth the coin?

The tune is Amazing worth every penny. I have always ran on 91 and I have an AFE intake. if the roads are at all wet it will break traction while driving before traction control kicks in.

 

[TremorDavd]

Mounted my Rotopax in prep for the annual camping/fishing trip to Bear Canyon Lake, about an hour out of Payson, Ariziona.

Nothing fancy. Take out the Boxlink plates from Ford. Screw the new standoffs in. Had to cut the bedliner a bit.

Product comes from Ridge Industries and sits where your Ford boxlink sits.

I already had the Rotopax and the RotopaX LOX Pack Mounts coming off my previous vehicle as evidenced by how well used they are.

PS: I mount them "upside down" when they are empty as a quick visual reminder that they are.

 

[DirtyMitch]

Just had a custom prerunner bumper built my Ian at Westfab. I know its not everyones cup of tea, but wasn't really happy with the options out there and this was actually much cheaper. Overall very happy with how it turned out. The SVC ACC bracket puts it right behind the Ford logo (an unusable location), so need to figure something else out. Might go with the ADD bracket, though that price is just ridiculous.

 

[CAMDENN]

Just had a custom prerunner bumper built my Ian at Westfab. I know its not everyones cup of tea, but wasn't really happy with the options out there and this was actually much cheaper. Overall very happy with how it turned out. The SVC ACC bracket puts it right behind the Ford logo (an unusable location), so need to figure something else out. Might go with the ADD bracket, though that price is just ridiculous.
View attachment 38019View attachment 38020