🛠️ What have you done to your F150 Tremor this week?

[texrex11]

Used some Dacron to make my own latch release for the driver side passenger seat back.
I’d add the video, but it won’t let me

 

[carpetweaver]

Dealer charged me for wheel locks when I bought my truck last week. Realized they never installed them, so took them in to add it on. Now I’m starting to regret it, I can’t get over how bad they look! Anyone recommend a nicer set to march the lug nuts?

 

[ApolloChurchill]

Dealer charged me for wheel locks when I bought my truck last week. Realized they never installed them, so took them in to add it on. Now I’m starting to regret it, I can’t get over how bad they look! Anyone recommend a nicer set to march the lug nuts?

Gorilla makes factory style wheel locks that blend in better.

 

[CAMDENN]

Dealer charged me for wheel locks when I bought my truck last week. Realized they never installed them, so took them in to add it on. Now I’m starting to regret it, I can’t get over how bad they look! Anyone recommend a nicer set to march the lug nuts?

I’m not sure if they’re still available because Gorilla always changes things but back in 2023, these are the ones that I purchased.

 

[carpetweaver]

I’m not sure if they’re still available because Gorilla always changes things but back in 2023, these are the ones that I purchased.

Does the black go well with the rim?

 

[Bigred700]

Does the black go well with the rim?

Black lug nuts goes BETTER!!!!!!

I have the black gorilla non locking and it made a big difference. Should of come with black Lug nuts in the first place!

 

[BillfLang]

Installed Baja S2 Sports. Need to wire them up this weekend.

View attachment 18997

Tell me how you did that ?

 

[CAMDENN]

Does the black go well with the rim?

Yes.

 

[Highline9]

Does the black go well with the rim?

I think the majority of folks would say yes (gorilla).

 

[CMar]

I think the majority of folks would say yes (gorilla).

Black definitely looks better than the chrome.

 

[MASH]

I have the FITCAMX which mounts to the rear view mirror and looks OEM.

 

[Spamslurpee]

I have the FITCAMX which mounts to the rear view mirror and looks OEM.

So far I like mine. Not only does it look OEM, but its relatively small and easily goes unnoticed.

 

[MSgt46270]

I have the FITCAMX which mounts to the rear view mirror and looks OEM.

I used to have Fitcam in my truck. It worked great when it worked. Keep an eye on your recordings. Mine would stop recording for days and no matter what I did to try and fix it, it didn't help. My wife still has hers in her car. I went with the VIOFO A329S 3CH, and been happy with it. The only issue I had with it was with the camera in the cab would fall because of the heat. So I super glued it on the tape and the panel of the truck. If I need to I can still remove it, but no plans on doing that.

 

[CMar]

Not just this week, but within the past few weeks I got the Built Right driver's rear seat latch purchased and installed. Not a huge fan since you still need to align the cross member, or at least I do.

Got an oil change and tire rotation. Was hoping to get the EIWE looked at and the front passenger 6x9 replaced but they didn't have loaners so I had to skip the warranty work.

Purchased a Rough Country Wireless air bag controller. Waiting to get some body work done before installing. Couldn't pass up the Amazon discount so purchased a bit before being ready.

 

[ThunderClap]

Not just this week, but within the past few weeks I got the ready built drivers rear seat latch purchased and installed. Not a huge fan since you still need to align the cross member, or at least I do.

Got an oil change and tire rotation. Was hoping to get the EIWE looked at and the front passenger 6x9 replaced but they didn't have loaners so I had to skip the warranty work.

Purchased a Rough Country Wireless air bag controller. Waiting to get some body work done before installing. Couldn't pass up the Amazon discount so purchased a bit before being ready.

Yea I have to align the cross member each time too regardless of whether I use it when in the folded up or the normal position.

 

[Jmottster22]

Reverse level. Removed rear blocks and dropped the rake 2 inches from 42-1/4" to 40-1/4". Rake is about 1-1/2" now.
View attachment 42490

That looks nice!
I'm thinking about doing the same thing. Did you need shorter u-bolts? How about a front and rear alignment?

 

[T-Rob]

Installed SpaceWhiteF150 ‘s fog light bracket with Diode Dynamics SSC2 LED Lights Pods. Love how it came out.

 

[TexasTea]

I’m not sure if they’re still available because Gorilla always changes things but back in 2023, these are the ones that I purchased.

I have those as well

 

[TexasTea]

Installed SpaceWhiteF150 ‘s fog light bracket with Diode Dynamics SSC2 LED Lights Pods. Love how it came out.

View attachment 44070
View attachment 44071

Should have come factory like this. Love it

 

[T-Rob]

Should have come factory like this. Love it

Agreed...that and rear wheel well liners. LOL