What's new
By:

🛠️ What have you done to your F150 Tremor this week?

Davtremor said:
I was looking at doing the rough country strut leveling kit and saw someone asked RC if it messes up blue cruise I’m sure they have to say it does for liability reasons. I see a lot of leveled trucks and lifted trucks with it here. Should I be okay with my blue cruise if I level it? View attachment 17006
Click to expand...
It does not affect blue cruise i have the RC struts installed
 
Killercat69 said:
Picked up my truck 402A with the 5.0 on February 3 and finished installing all the parts earlier this week super happy about it other than the scratches on the paint on the driverside and also the rusty rear differential but thankfully the dealership is fixing the issues on Tuesday and providing a rental car while the work is being done here is a list of parts installed
- ronin shorty antenna
- corsa cold air intake
- cobb coolant tank cover
- rigid D-SS a pillar lights
- side vent leds
- RC monotube leveling kit
- 18in fuel rebel 6 wheels
- ambient lighted cupholders
- husky liner rear wheel well liners
- Yokohama g003 MT tires 295/70/R18
- lasfit floor mats
- bed cover and spray in bed liner from factory
Click to expand...
Did you see any changes in performance/mileage with the Corsa CAI??
 
Has anyone thought about swapping out the god awful chrome radio and A/C knobs
 
Gmoney said:
Has anyone thought about swapping out the god awful chrome radio and A/C knobs
Click to expand...
I hate how much chrome they put in the interior. I considered taking them apart and painting them but it would be a major hassle. I just got black knob covers on Amazon and put those on with small tacks of super glue.
 
Been out of town more than in town since picking it up, but I have had the chance to install quite a few of the "Tremor Forum Starter Kit" stuff:

Husky rear Liners (Anyone in VA that wants a brand new set, I got two sets in a shipping error, let me know)
Lasfit floor mats-great value IMO over something like weathertechs
J&L oil catch can
Stubby antenna
V1 Cut Tremor grip tape sill guards front and rear
OEM bed mat via Ford points
Full 3M PPF front end/partial hood/headlights/mirror caps (DIY'd that one to save a few grand)
Ceramic-graphene base spray and ceramic-graphene wax from TurtleWax
Meadowlark XL rear bench dog seat cover (Highly recommend as it prevents our hound from slobbering on the door cards via zipper side panels and the center is mesh so they can see you up front.)

Still plenty to do, tint for sure and a bed cover.

1677867641653.webp
 
Cranbery said:
I hate how much chrome they put in the interior. I considered taking them apart and painting them but it would be a major hassle. I just got black knob covers on Amazon and put those on with small tacks of super glue.
Click to expand...
What knobs did you get from Amazon?
 
Line-X bedliner

Forscan: Obstacle parking cameras and delete fake engine sound (honestly not sure if this did anything).

Nickel mod to keep center console up. Had one round spring and one flat which I thought was interesting. Worked like a charm adding to both top and bottom.
 
octave said:
Line-X bedliner

Forscan: Obstacle parking cameras and delete fake engine sound (honestly not sure if this did anything).

Nickel mod to keep center console up. Had one round spring and one flat which I thought was interesting. Worked like a charm adding to both top and bottom.
Click to expand...
I noticed the Fake Engine noise mod worked for me. What is the obstacle parking cameras?
 
Fozzy said:
I noticed the Fake Engine noise mod worked for me. What is the obstacle parking cameras?
Click to expand...
Turns on the 360 cameras when the front sensors senses something.

IPMA:

706-16-01 xxxB-xxxx-xxxx old value should be 3. I have the Parking assist delete.
 
KewTremor33 said:
Anyone try these knobs on a 23' Tremor?? Some of the neg amazon reviews some fitment issues....
Click to expand...
It's because they don't have anything inside and if you just slide them on some of them fall off. I put some 3M tape but then they were too tight. So i put a couple small dabs of super glue and it was just enough to have them not slide off at all. If i ever wanted to take it off a little acetone would remove any residue.
 

Attachments

  • 20220415_152054.webp
    20220415_152054.webp
    165.4 KB · Views: 136
  • 20220415_151857.webp
    20220415_151857.webp
    192.4 KB · Views: 130
  • 20220415_151847.webp
    20220415_151847.webp
    118.6 KB · Views: 127
  • 20220415_151824.webp
    20220415_151824.webp
    156.2 KB · Views: 131
Cranbery said:
I got those previously. Cool family company. I didn't like the actual look and feel though, made the interior less premium.
Click to expand...
Agree! The black aluminum do look nice to cut down on the chrome......
 
You must log in or register to reply here.
F150 Tremor Forum Favs 👍 View All

F150 Tremor Forum Photos

Halolifts Coilover - Group Buy Info in First Post! Avalanche Gray F150 Tremor Photo Thread What have you done to your F150 Tremor this week? Oracle Modular Tailights Leveling Kit Question for First Time Poster New Audio System Update

F150 Tremor Forum Photos

Halolifts Coilover - Group Buy Info in First Post! Avalanche Gray F150 Tremor Photo Thread What have you done to your F150 Tremor this week? Oracle Modular Tailights Leveling Kit Question for First Time Poster

Recent Discussions

Back
Top