Leveling Kit

[Jafo58]

Great looking truck ArmySooner. I have the same Tremor and have been waiting to see more on the 2" AS before getting one installed.

 

[Jafo58]

Any idea what would be the wheel / tire combination that can installed that won't rub?

 

[High_Country]

AS 2” installed and aligned for $325 in OKC at Cali Customs. All sets of pics have the after shots on top and before on bottom. Very happy with the look, ride, and CV angles.View attachment 4171View attachment 4172View attachment 4173

Looks awesome man. Can’t wait to get mine…

 

[Erlo22]

AS 2” installed and aligned for $325 in OKC at Cali Customs. All sets of pics have the after shots on top and before on bottom. Very happy with the look, ride, and CV angles.View attachment 4171View attachment 4172View attachment 4173

Been waiting to see a 2" lift on a white Tremor. Love the look of it. Was this the Tremor specific 2" or the standard F150 2" from AS? Was looking online and noticed there was a Tremor specific version.

 

[ArmySooner405]

Been waiting to see a 2" lift on a white Tremor. Love the look of it. Was this the Tremor specific 2" or the standard F150 2" from AS? Was looking online and noticed there was a Tremor specific version.

This is the one. I’m very happy with how it turned out too.

 

[AzzA]

Been waiting to see a 2" lift on a white Tremor. Love the look of it. Was this the Tremor specific 2" or the standard F150 2" from AS? Was looking online and noticed there was a Tremor specific version.

FYI they are the same part, just a different sticker on the box. Check out the part numbers on the AS web site. Both are Model:AS20021PC
Tremor https://autospringkits.com/product/...remor-2-front-leveling-kit-powdercoated-copy/
Standard F150 https://autospringkits.com/product/2021-2022-ford-f150-2-front-leveling-kit-powdercoated/

 

[Cranbery]

AS2.5, 295/70/18 Baja boss. No rub in full radius or reverse. Ride is great. Shop said no problem aligning.

No before pics, apologies

 

[Jafo58]

Just a general question for any Tremor owners with a leveling or lift kit installed. What would be the largest wheel/tire combo that could be installed if I install either a 2' or 2.5" level that doesn't require any trimming? What about either a 3" or 4" lift kit? Any assistance will be appreciated. Really don't want to cut or trim anything on this truck. Thanks

 

[jmarshall828]

View attachment 4174
This is the one. I’m very happy with how it turned out too.

Looks like w/ the 2" from Auto Spring you can run 34 x12.5 x 18 without rubbing. I couldn't find a dealership to do the 2.5" Pro Comp or A.S., but they would do this 2" from A.S. I'd rather have piece of mind with a dealership due to warranty issues. If I went to a 4x4 shop and down the line something (not even related to this probably!) the dealer would play the game that they cant fix it due to the level kit & the fact it wasn't installed by them.

 

[jmarshall828]

View attachment 4174
This is the one. I’m very happy with how it turned out too.

Any issues since install?

 

[Jafo58]

Thanks for the info. What would you recommend on the wheel offset if was to go with 34 x 12.5 x18? At the moment I'm looking at the Fuel Rebel which they come -12; 1; or 20 offset. 18 x 9

 

[Badmothertrucker]

AS2.5, 295/70/18 Baja boss. No rub in full radius or reverse. Ride is great. Shop said no problem aligning.

No before pics, apologies

Looking good!

 

[ArmySooner405]

Any issues since install?

No issues whatsoever. It really drives/rides so similar to stock too. IMO this is one of the best options if anyone is wanting it to look more leveled without going extreme part swapping.

 

[FTLBS]

**Attention anyone with the AS 2.0" kit:
Can any of you confirm if the CV boot comes in contact with the lower control arm or strut at full droop? You might have to jack up the front axle to confirm this. This might make my decision of whether or not to level my truck

(EDIT: Photo is from @sethysan showing the CV boot touching his LCA at full droop with the ICON Stage 2 system on his 2017 F-150)

 

[ArmySooner405]

**Attention anyone with the AS 2.0" kit:
Can any of you confirm if the CV boot comes in contact with the lower control arm or strut at full droop? You might have to jack up the front axle to confirm this. This might make my decision of whether or not to level my truck

View attachment 4198

I’ll jack my front up and snap a pic to see.

 

[ArmySooner405]

**Attention anyone with the AS 2.0" kit:
Can any of you confirm if the CV boot comes in contact with the lower control arm or strut at full droop? You might have to jack up the front axle to confirm this. This might make my decision of whether or not to level my truck

View attachment 4198

That’s about as good as I can get for pictures right now. As far as I can see, there’s no contact between the two.

 

[FTLBS]

That’s about as good as I can get for pictures right now. As far as I can see, there’s no contact between the two.

Excellent! Thank you @ArmySooner405. Here is a photo of mine for comparison (stock):

 

[b-real]

View attachment 4202View attachment 4203
That’s about as good as I can get for pictures right now. As far as I can see, there’s no contact between the two.

Looks like no contact with the LCA, but hard to tell if it might be touching the shock? Wonder what the AS 2.3 or 2.5 would look like at full droop?

 

[S3MFrank]

My Wheels came in and installed. Man these were pretty heavy. It was fun trying to put them on without scratching them on the rotors and stuff. ICON Compressions Satin Black 18x9 +6 offset / Nitto Ridge Grapplers 295/70/18. I also took pics of the suspension with the wheel off. I know some were curious about the CV's and stuff. Does not rub but most already knew that with this size. Measured front height again with the stock wheels. It settled just a little at 40- 11/16". Height right after install of just the suspension was 40-7/8" about 2 weeks ago.

Was this a 21+ Icon Kit?

 

[1warmtremor]

Bought my Tremor yesterday and today I ordered AS 2.5. I got ride of that rake on my 19 asap, looking to do the same, thanks for all the info guys! Hopefully I’ll be happy with a slight rake.