What's new

Stuff I've added to my Tremor

I can't stand the visor warning messages, but I was concerned that they may not come off well...so I went with some ebay black stickers that work great.
They fit perfectly over my Tremors warning messages and now my eye isn't bugged!

View attachment 1484

Here's where I got them on ebay
Love this, thanks for sharing. Ordered!
 
No way am I paying 300+ per rim for mounting my winter studded tires on cool rims.

Got this older set of rims for cheap, don't like the silver but the rims are likely to get screwed up by chains anyhow, so it is what it is.

Tire.webp
StuddedTires.webp


It will look much cooler in the spring with the original rims and these black lug nuts.
 
No way am I paying 300+ per rim for mounting my winter studded tires on cool rims.

Got this older set of rims for cheap, don't like the silver but the rims are likely to get screwed up by chains anyhow, so it is what it is.

View attachment 1614View attachment 1615

It will look much cooler in the spring with the original rims and these black lug nuts.
My winter rims are the cheap Steeles and for good measure too.
 
Had anyone taken these liner badges to see if it's a close match for the outside?
 
Mine are the Husky mats with the emblem from Designer Decals on etsy

 
The OffRoam vent mounts fit great on our Tremors.
I use it for my phone and also have a tablet mount, works great.

IMG_9673.webp
RoamMount.2.webp

 
Finally got my GFC camper installed.
I love the fact I can use my bed normally, but still camp in comfort above.

It creates a bit of noise, I suppose any camper top would. So I'll be adding a rhino rack and wind deflector.
GFC_Tremor_Side.jpg
GFC_Tremor_Back.jpg


GFC_Tremor_Open.jpg



Going to mount two BajaDesigns LP6's to the front edge of the camper and get a couple ditch lights...but I need to figure out the wire routing, wire in deutsch connectors to the uplifter switches and get relays working for the current draw.
 
Finally got my GFC camper installed.
I love the fact I can use my bed normally, but still camp in comfort above.

It creates a bit of noise, I suppose any camper top would. So I'll be adding a rhino rack and wind deflector.
View attachment 2179View attachment 2180

View attachment 2181


Going to mount two BajaDesigns LP6's to the front edge of the camper and get a couple ditch lights...but I need to figure out the wire routing, wire in deutsch connectors to the uplifter switches and get relays working for the current draw.
I'm still considering going that direction. I'd love to hear your thoughts on it after a few trips
 
I've had my 2022 Atlas Blue for 2 weeks now and have added:

1. Weather Tech mats (front and back)
2. Retrax MX Pro rollback cover
3. Vent Shades and Window Tint (front doors and windshield strip)
4. Spray-in Bedliner (LineX)
5. VIP Auto Accessories Tremor Orange F150 tailgate lettering
6. aFe Power Cold Air Intake kit (GT Momentum Pro 5R) on backorder...
7. Rough Country 2.5" Tremor specific Leveling Kit (on order)...
8. Ronin Factory .50 cal Bullet Antenna
9. V1 Cut Tremor Sill Plate Scuff Guards
10. J&L 3.0 Oil Catch Can

Went through this sickness with my 2017 Raptor (which I recently sold), so this time I just embraced the madness!
 

Attachments

  • IMG_1799.webp
    IMG_1799.webp
    432.9 KB · Views: 406
Last edited:
I'm going to take a roto zip to my built rite bed molle panels as they won't go on with the clamps for the camper in place.
I'm hoping the roto zip will cut them like butter, allow me to round the edges and then finish off with some black paint...at least that's the plan.

The camper makes an annoying sound when driving that's for sure.
Rhino rack wind deflector can't get here soon enough.
 
I was wondering how much noise that would make. It’s a really cool idea, but definitely not for a part time weekend warrior like myself who would only need it for the few MTB races a year that are to far from the Hilton 😁!
 
I've had my 2022 Atlas Blue for 2 weeks now and have added:

1. Weather Tech mats (front and back)
2. Retrax MX Pro rollback cover
3. Vent Shades and Window Tint (front doors and windshield strip)
4. Spray-in Bedliner (LineX)
5. VIP Auto Accessories Tremor Orange F150 tailgate lettering
6. aFe Power Cold Air Intake kit (GT Momentum Pro 5R) on backorder...
7. Rough Country 2.5" Tremor specific Leveling Kit (on order)...
8. Ronin Factory .50 cal Bullet Antenna
9. V1 Cut Tremor Sill Plate Scuff Guards

Went through this sickness with my 2017 Raptor (which I recently sold), so this time I just embraced the madness!
Atlas Blue looks sharp, I have a new loaded 22’ Atlas I ordered 2 weeks ago. In meantime I love my leadfoot and will mod that for 5+ months till Atlas comes in then take off what mods I can such as exhaust, wheels/ tires/ mats etc.
 
I've had my 2022 Atlas Blue for 2 weeks now and have added:

1. Weather Tech mats (front and back)
2. Retrax MX Pro rollback cover
3. Vent Shades and Window Tint (front doors and windshield strip)
4. Spray-in Bedliner (LineX)
5. VIP Auto Accessories Tremor Orange F150 tailgate lettering
6. aFe Power Cold Air Intake kit (GT Momentum Pro 5R) on backorder...
7. Rough Country 2.5" Tremor specific Leveling Kit (on order)...
8. Ronin Factory .50 cal Bullet Antenna
9. V1 Cut Tremor Sill Plate Scuff Guards

Went through this sickness with my 2017 Raptor (which I recently sold), so this time I just embraced the madness!
#8 is epic, added to my "to buy" list, thanks for sharing!
 
I just wish we could use our iphone as the truck key too — one less thing to carry around.
My wife’s Aviator has the phone as a key, should come to the F-150 in the next 10 years.
 

Recent Discussions

Back
Top