What's new

🛠️ What have you done to your F150 Tremor this week?

Last edited:
🤣🤣🤣 "When setup right these ride smoother than my brain" 🤣🤣🤣. Sold. @ApolloChurchill what say you? Show me where to buy, and let's see your stance. These look amazing.

Unfortunately I haven’t had much time to really test them. Still waiting on the 8100 for the rears to come in and am getting a little impatient about it. The fronts are really nice so far, more stable on the road than stock but still pretty cozy otherwise for daily driving. Planning to take it out soon and see what it can do offroad
 
Unfortunately I haven’t had much time to really test them. Still waiting on the 8100 for the rears to come in and am getting a little impatient about it. The fronts are really nice so far, more stable on the road than stock but still pretty cozy otherwise for daily driving. Planning to take it out soon and see what it can do offroad
Lemme know. Lotta coin but man the shocksurplus review guy seemed to love them on the bronco. It's either that or fox 2.0 for me it seems. I need soft and plush.
 
🤔😳……The black top is okay but the white horizontal stripes on the grill looks like something that was purchased out of the JC Whitney catalog or from AutoZone and just slapped on.
Looks better in person, I personally hated the orange grill and will probably change it once I figure out what fits
 
Last week got an Alu-Cab Canopy installed and promptly drove from Socal to Northern Colorado and back stopping in Utah and a few other places. Going to install first set of new tires from factory tires next week with the oil change (295/70/18 KO3).
 

Attachments

  • IMG_7541.webp
    IMG_7541.webp
    292.4 KB · Views: 93
  • IMG_7569.webp
    IMG_7569.webp
    279.3 KB · Views: 97
  • IMG_7659.webp
    IMG_7659.webp
    659.5 KB · Views: 93
Installed the upgraded end caps for the BAK Revolver

Called them for warranty as one of mine flew off while driving.

RT sent me two service kits. Looks like the modification is the screw to post to keep them from popping off.
 

Attachments

  • IMG_2194.webp
    IMG_2194.webp
    206 KB · Views: 43
Installed the upgraded end caps for the BAK Revolver

Called them for warranty as one of mine flew off while driving.

RT sent me two service kits. Looks like the modification is the screw to post to keep them from popping off.

Thanks for this. I forgot about this quiet change and have already had to replace mine before. Between the X4TS coming out a few months after installing my X4S and then installing a few of the covers on some Super Duty Tremors and seeing these new end caps I have felt like no matter what there's always something better. The grass is greener where you don't piss on it as they say though. Gonna have to reach out and get these for sure
 
Last edited:
Last week got an Alu-Cab Canopy installed and promptly drove from Socal to Northern Colorado and back stopping in Utah and a few other places. Going to install first set of new tires from factory tires next week with the oil change (295/70/18 KO3).
Good looking topper
 
Last week got an Alu-Cab Canopy installed and promptly drove from Socal to Northern Colorado and back stopping in Utah and a few other places. Going to install first set of new tires from factory tires next week with the oil change (295/70/18 KO3).
Looking sharp! Ready for the outdoors and all of the adventures!
 
Also looking at this...installing yourself? When you get it on could you please post updates?
Install was pretty easy. I had never had a cover before but it was pretty straight forward.. did a video of the install

 

Attachments

  • Screenshot_20250819_232824_YouTube.webp
    Screenshot_20250819_232824_YouTube.webp
    37.4 KB · Views: 22
  • Screenshot_20250819_232653_YouTube.webp
    Screenshot_20250819_232653_YouTube.webp
    72.8 KB · Views: 23
Install was pretty easy. I had never had a cover before but it was pretty straight forward.. did a video of the install

Tremors, jeeps, motorcycles AND puppies!! Can I come over? Seriously though, thank you for this video...I was worried I'd need help lifting, etc. being a single guy with no help, but you proved that wrong. Super video and install, thank you again!
 
Tremors, jeeps, motorcycles AND puppies!! Can I come over? Seriously though, thank you for this video...I was worried I'd need help lifting, etc. being a single guy with no help, but you proved that wrong. Super video and install, thank you again!
Absolutely! Those are some of the best things in life, adding a buddy makes it even better! Glad you liked the video. I don't have a huge following but I am always hopeful that they help others. When it comes time for your install, if you have any questions, send me a message.
 
Not super exciting but got the front windows tinted after week #1 with the truck. Matching the rear. Next on the list is the Pro Comp 2.5" front level!
 

Attachments

  • PXL_20250823_142838627.webp
    PXL_20250823_142838627.webp
    431.3 KB · Views: 33
Technically not this week, but 2 weeks ago I took off my old retrax pro xr tonneau cover and yakima overhaul hd rack and replaced it with a Rough Country Modular camper shell and Rhino Rack HD cross bars. The RTT is the same I used on the previous setup. I was rushing to get everything installed prior to a week long camping trip in the sierra's. I just got back from that on saturday and the new setup was spectacular, vastly exceeding my expectations.

Unfortunately the prep for the trip, and then the trip was such a blur that I forgot to get photos of it setup at the various campsites. Way too much fun being had between driving, mountain biking, camping/cooking etc to remember to take photos. Oh well, the memories are vivid at least... in the meantime yall are going to have to make do with road side photos.

PXL_20250822_153142279.webp


PXL_20250822_153154582.webp


Edit, this was my previous setup for reference:
PXL_20230831_022401299.webp


PXL_20230826_222245916 (1).webp
 
Back
Top