🛠️ What have you done to your F150 Tremor this week?

[Dfris]

Finally got the uptop bed rack on.

 

[g9Tremor]

Line-X bedliner

Forscan: Obstacle parking cameras and delete fake engine sound (honestly not sure if this did anything).

Nickel mod to keep center console up. Had one round spring and one flat which I thought was interesting. Worked like a charm adding to both top and bottom.

Thanks for the Nickel Mod info.

 

[Cherry Ghost]

Thanks for the Nickel Mod info.

This is perfect. I was about to research replacing the springs. Thanks!

 

[Fozzy]

View attachment 21821
Finally got the uptop bed rack on.

If I do another bed rack and cover this is what I want to go with. The Retrax cover is garbage for what you pay for it. This is the setup, the Uptop stuff is awesome.

 

[MidlandTremor]

Added load bars to RSI cap & vinyl graphics to the rocker panels. Was wanting a subtle break up of the stone grey. Also have the hood graphics to install later.

 

[renewedcaper]

View attachment 21932
Added load bars to RSI cap & vinyl graphics to the rocker panels. Was wanting a subtle break up of the stone grey. Also have the hood graphics to install later.

I like that vinyl a lot. Where does it come from?

Oof, these maybe?

 

[MidlandTremor]

I like that vinyl a lot. Where does it come from?

Oof, these maybe?

Yep! You found them. Same shop on Etsy makes the black vinyl that I put on as well. I’ve never installed graphics; was a pretty easy process with his videos.

 

[FireMedic36]

Finally got some time to do the first round of must-haves:

• Stubby antenna
  • Rydonair antenna from Amazon, as recommended by so many here ($30)
• LED license plate lights
  • Philips bulbs from Menards ($12)
• Put in BoxLink cleats
  • always left them in the box on my four previous trucks
• OEM rear wheel well liners
  • as others mentioned, Husky severely backordered and these were in stock at my local dealer ($210)
• BakFlip MX4 hard tonneau cover
  • Concerned about the back of the rails, sharp edges and isn’t sealed well (~$1k)

 

[KewTremor33]

Finally got some time to do the first round of must-haves:

• Stubby antenna
  • Rydonair antenna from Amazon, as recommended by so many here ($30)
• LED license plate lights
  • Philips bulbs from Menards ($12)
• Put in BoxLink cleats
  • always left them in the box on my four previous trucks
• OEM rear wheel well liners
  • as others mentioned, Husky severely backordered and these were in stock at my local dealer ($210)
• BakFlip MX4 hard tonneau cover
  • Concerned about the back of the rails, sharp edges and isn’t sealed well (~$1k)

Your MX4 is missing the the end caps and your left side is not fitted correctly. Everything should fit evenly on the tailgate with NO gaps. Your caps might have come off during shipping, or someone forgot to attach them. I would take all brackets off, to include the nuts and bolts at front and re-allign the cover. Good Luck! I I attached some pics.

 

[Rabidtastic]

They've got excellent customer service. One of my corner pieces was busted, emailed em, they sent over a goody bag of replacement parts

 

[MidlandTremor]

Installed my Livernois tune today with the 91-93 performance tune…..OH BOY!! Makes the truck MUCH more responsive.

& I added some Cobb accessories under the hood

 

[JTTremor]

View attachment 21932
Added load bars to RSI cap & vinyl graphics to the rocker panels. Was wanting a subtle break up of the stone grey. Also have the hood graphics to install later.

I'm still waiting for my RSI Smartcap. Hopefully soon since they're finally in production in Texas.

 

[JTTremor]

This week I went camping 100 or so miles south of Tahoe, took the truck offroad quite a bit. Went to some remote parts of CA. Truck was awesome had a lil part where I was even able to use rock crawl mode (didn't need it but it was awesome anyway). Looking forward to going back, as there are hundreds of miles of trails to hit in the area.

Nice, I've backpacked near there for years.

 

[MidlandTremor]

I'm still waiting for my RSI Smartcap. Hopefully soon since they're finally in production in Texas.

I ordered mine July 22; got it in July 23. Hopefully yours comes soon; they are awesome & was worth the wait to me. Post some pics when you get yours!

 

[JTTremor]

Wilco

 

[ShadowFox]

Been trying to escape the Texas heat.

 

[nkyhunter]

Too hot for bags but got the letters on finally

View attachment 21629

Where you get the f150 custom inserts those are nice!!

 

[Speeddmn]

Bed liner done tonight

 

[Rabidtastic]

Where you get the f150 custom inserts those are nice!!

LUDesignsNY iirc...the one everyone else seems to use on Etsy

 

[Rhaboush]

Made a Baja Designs S8 Kit for the Raptor fit.