Aux Light Bracket

[SpaceWhiteF150]

Morimoto 4Banger pods are now confirmed!

 

[SpaceWhiteF150]

Was sent these yesterday!! Love seeing the builds!

I have brackets in stock ready to ship! If yall need one or are interested in what’s involved, just shoot me a pm!!

 

[evalerio16]

Not sure if anyone here with a 2024 has done this nod yet. But, if so does anyone have the part number for the 3.5s bumper cover? The part number given in this thread (ML3Z-17B968-BB) is only for 21 to 23 F150s. I called my local Ford dealership and there were no help since my VIN is for a 5.0. Thanks in advance.

 

[SpaceWhiteF150]

Not sure if anyone here with a 2024 has done this nod yet. But, if so does anyone have the part number for the 3.5s bumper cover? The part number given in this thread (ML3Z-17B968-BB) is only for 21 to 23 F150s. I called my local Ford dealership and there were no help since my VIN is for a 5.0. Thanks in advance.

I had the part # at one point let me find it!

 

[CAMDENN]

Not sure if anyone here with a 2024 has done this nod yet. But, if so does anyone have the part number for the 3.5s bumper cover? The part number given in this thread (ML3Z-17B968-BB) is only for 21 to 23 F150s. I called my local Ford dealership and there were no help since my VIN is for a 5.0. Thanks in advance.

Contact Tasca Ford or Fairway Ford out of OH.

 

[SpaceWhiteF150]

Might be the first 4 pod DD SS3 setup! SS3s in the bumper with SSC2s up top!!

 

[SpaceWhiteF150]

Baja boys are now included!! I have squadron cradles ready to rock! Also XLs are ready to rock!

 

[evalerio16]

Just wanted to drop some info for anyone utilizing the aux switches. Just finished installing my upfitter wiring harnesses I purchased from Cblaxx19. I was unable to find the correct color code anywhere online. I guess Ford changed the wiring colors for the 2024 Tremor. After testing each wire, the following is the wiring for the Aux switches:
Aux 1.. Purple/Gren
Aux 2.. Green/Brown
Aux 3.. Yellow
Aux 4.. Brown
Aux 5.. Blue/Orange
Aux 6.. Yellow/Orange

 

[Cblaxx19]

Just wanted to drop some info for anyone utilizing the aux switches. Just finished installing my upfitter wiring harnesses I purchased from Cblaxx19. I was unable to find the correct color code anywhere online. I guess Ford changed the wiring colors for the 2024 Tremor. After testing each wire, the following is the wiring for the Aux switches:
Aux 1.. Purple/Gren
Aux 2.. Green/Brown
Aux 3.. Yellow
Aux 4.. Brown
Aux 5.. Blue/Orange
Aux 6.. Yellow/Orange

Interesting that they only changed the wire coloring for aux 3.

It use to be green w/blue stripe.

 

[SpaceWhiteF150]

Finally found the Ecoboost bumper trim piece for those looking. It’s Part #: RL3Z17B968CB.

 

[SpaceWhiteF150]

A night rider pod light install from a Canadian brother!!

 

[SpaceWhiteF150]

For those of you that ordered Baja cradles before official pics were taken, yall are the best!! Here you go, the absolute strongest cradles on the market! If I do another run, they will be much thinner material!

Rear Mount Baja Squadron Cradles, 3/16” powder coated steel with stainless hardware!

 

[Cblaxx19]

For those of you that ordered Baja cradles before official pics were taken, yall are the best!! Here you go, the absolute strongest cradles on the market! If I do another run, they will be much thinner material!

Rear Mount Baja Squadron Cradles, 3/16” powder coated steel with stainless hardware!

those are certainly beefy! Almost look like billet! Haha

 

[SpaceWhiteF150]

those are certainly beefy! Almost look like billet! Haha

Way to much material!!

 

[CAMDENN]

Way too much material!!

As long as it works and doesn’t cause any problems with anything else, overkill is always a good thing.

 

[Bumpers]

Before and after. Got my brack lights and harness installed last night. Have to wire up my switch harness to the truck and should be good to go. I think it took me about 3 hours start to finish but its not a bad install at all. Ive not taken one of these trucks apart before so i was taking it easy with all the plastic parts. These trucks were not designed for someone with large hands to work on them lol.

 

[SpaceWhiteF150]

Before and after. Got my brack lights and harness installed last night. Have to wire up my switch harness to the truck and should be good to go. I think it took me about 3 hours start to finish but its not a bad install at all. Ive not taken one of these trucks apart before so i was taking it easy with all the plastic parts. These trucks were not designed for someone with large hands to work on them lol.
View attachment 36341
View attachment 36340

Turned out sick!!!

 

[SpaceWhiteF150]

Here’s a triple Baja XL install!!

 

[McCarthy]

@SpaceWhiteF150 what fits on a 25? Non modular bumper.

 

[SpaceWhiteF150]

@SpaceWhiteF150 what fits on a 25? Non modular bumper.

Can you send a pic? Is it the same as the 24 non-modular?