Guess I was on the wrong forum all along?

[yank27]

For which lights specifically? Either way, answer is no. Grill lights and fender vent lights were both ran through the engine bay. Running board lights were ran up through the fenders as well and into the loom along with the fender vent lights. None of the wires enter the interior. The Aux switch wires are located in the engine bay next to the battery. Use set A.

View attachment 3465
View attachment 3466

Thanks appreciate the info

 

[Az3_3z]

Thank you!! I used Aux switches for both, and will do the same with the vent lights. I REALLY went back and forth here. Itd be nice to have it all light up when the truck starts, but I also felt like I may not always want to be lit up/and if you've got Aux switches, might as well use them...View attachment 1056

The grill lights look amazing. where can I get those lights? I've looked everywhere but most websites have the round lights or some cheap looking ones. couldn't find any that look nice and clean like that.

 

[TREMOR_K32E18]

The grill lights look amazing. where can I get those lights? I've looked everywhere but most websites have the round lights or some cheap looking ones. couldn't find any that look nice and clean like that.

Says F150LEDs. Maybe they still offer them?

https://www.f150tremor.com/threads/guess-i-was-on-the-wrong-forum-all-along.345/post-4759

 

[Cblaxx19]

The grill lights look amazing. where can I get those lights? I've looked everywhere but most websites have the round lights or some cheap looking ones. couldn't find any that look nice and clean like that.

Says F150LEDs. Maybe they still offer them?

https://www.f150tremor.com/threads/guess-i-was-on-the-wrong-forum-all-along.345/post-4759

FYI, the F150leds.com grille lights seem to be the same as the grille lights you can buy from O'reilly autoparts for $30.

they are just little plastic lights that adhesive tape on. nothing special in terms of build quality or anything.

 

[mAtTyG04]

Let me track it down for you

Ever get this part #? I can’t seem to find a muffler on the magnaflow website that fits your description. Thanks in advance!

Is it this?

 

[Tremor14]

Hello everyone, Brad from AZ.

Originally ordered a Tremor on June 16th, the day they went live, and after getting rolled week after week, and eventually to a 2022, I managed to snag one from a local dealer at X-plan. All it was missing from my original build was the Torsen option, and I have since come to terms with that.

Picked up Sept 30th.
View attachment 812
So far I have added:
Husky Wheel Liners
Husky Mud Flaps
Husky Floor Liners
Stubby Antenna
Painted the ovals and Chrome
S&B Cold Air Intake
Pedalbox Throttle module
Magnaflow 24"x8", 3" inlet and outlet, straight through muffler
Line-X bedliner
View attachment 813
View attachment 811

Plan on adding the AFE Scortcher tune after we see a few more positive data points - Looking to mop up on the all the Raptors in the neighborhood.

Picking up my new travel trailer this weekend and have a couple hundred miles home to get familiar with it. Handling and squat will determine the plan for a lift.
View attachment 814
View attachment 815
View attachment 816
Leaning towards a shock upgrade 2" level and sticking to 33s, either Fox or Falcon (I like their tow-mode selector) once they confirm '21/Tremor fitment. (I know there are some '21s out there with both setups but I'm waiting for the manufacturer to give the thumbs up and see the difference in valving/dimensions vs the prior gen.

That's all for now. Look forward to contributing to the forum.

What dealer did you go with and were you happy with the experience?

 

[Netranger6]

Hello everyone, Brad from AZ.

Originally ordered a Tremor on June 16th, the day they went live, and after getting rolled week after week, and eventually to a 2022, I managed to snag one from a local dealer at X-plan. All it was missing from my original build was the Torsen option, and I have since come to terms with that.

Picked up Sept 30th.
View attachment 812
So far I have added:
Husky Wheel Liners
Husky Mud Flaps
Husky Floor Liners
Stubby Antenna
Painted the ovals and Chrome
S&B Cold Air Intake
Pedalbox Throttle module
Magnaflow 24"x8", 3" inlet and outlet, straight through muffler
Line-X bedliner
View attachment 813
View attachment 811

Plan on adding the AFE Scortcher tune after we see a few more positive data points - Looking to mop up on the all the Raptors in the neighborhood.

Picking up my new travel trailer this weekend and have a couple hundred miles home to get familiar with it. Handling and squat will determine the plan for a lift.
View attachment 814
View attachment 815
View attachment 816
Leaning towards a shock upgrade 2" level and sticking to 33s, either Fox or Falcon (I like their tow-mode selector) once they confirm '21/Tremor fitment. (I know there are some '21s out there with both setups but I'm waiting for the manufacturer to give the thumbs up and see the difference in valving/dimensions vs the prior gen.

That's all for now. Look forward to contributing to the forum.

Husky liner and flaps work together? Can you keep the stock protectors along bottom of panels? Will the flap rub off paint? Interested. Need same solution.