Leveling Kit

[MOHunter]

When I called Eibach at the end of October they told me they would hopefully have springs out by early March. It’s going to be a long wait.

 

[jthomp343]

2" Rough Country leveling kit with 33x12.50x22s rides great!

Looks good. You have to remove the crash bars and or any trimming? Which kit you go with?

 

[MOHunter]

21-26 F150 S3M 2.3" Offset Leveling Kit S3M-21LK1

Assuming this will work for those who are interested. I think I’m still going to hold out for Eibach though.

 

[BA73]

After towing my TT around, I'm leading towards this kit to stiffen up the rear and allow the front height to be dialed in so that the truck will sit dead level while towing. I emailed Tereflex about tremor fitment but have yet to receive a response.

Welcome to Stage3Motorsports.com - Enjoy The Upgrade

 

[AZSteve]

Ok, I need someone who has done or is about to do a leveling kit to PLEASE take a perfect side view picture before and after doing the leveling so we can get a good look at the change. Take the pictures on level ground and in the same position for both photos. I’ve been looking but don’t see any good comparison photos so we can see the change. I am really thinking about doing it but want to see what it will look like before I commit. If no one wants to do it and I decide to take the plunge I will share the photos once complete.

 

[KingEddy]

Ok, I need someone who has done or is about to do a leveling kit to PLEASE take a perfect side view picture before and after doing the leveling so we can get a good look at the change. Take the pictures on level ground and in the same position for both photos. I’ve been looking but don’t see any good comparison photos so we can see the change. I am really thinking about doing it but want to see what it will look like before I commit. If no one wants to do it and I decide to take the plunge I will share the photos once complete.

Mine goes in on Wednesday. I am getting a 2.5 inch puck from Pro Comp. Installed at the dealership. I will post some pics!

My plan is do the pics with a measuring tape for true lift comparison. I will be taking them in my garage, it is the most level spot I got.

 

[AZSteve]

Mine goes in on Wednesday. I am getting a 2.5 inch puck from Pro Comp. Installed at the dealership. I will post some pics!

My plan is do the pics with a measuring tape for true lift comparison. I will be taking them in my garage, it is the most level spot I got.

You sir, are a gentleman and a hero!

 

[KingEddy]

MYou sir, are a gentleman and a hero!

@AZSteve here are the before pics:

My apologies for the dirty truck, we have had multiple storms and very slushy roads.

Truck goes in tomorrow for the level. I will post similar photos tomorrow evening. Let me know if you want a different view.

 

[Captain]

Fyi, I'm pretty sure any 2" or greater lift via strut spacer will cause fit issues at the cv boot like @Gibson pointed out on page 6 here.

Procomp kit, pics on page 2, may have best chance at avoiding interference fit bc it gets more of its lift from perch collar than the small strut spacer in the kit.

 

[MOHunter]

Fyi, I'm pretty sure any 2" or greater lift via strut spacer will cause fit issues at the cv boot like @Gibson pointed out on page 6 here.

Procomp kit, pics on page 2, may have best chance at avoiding interference fit bc it gets more of its lift from perch collar than the small strut spacer in the kit.

I think the offset spacer from stage 3 Motorsports is suppose to eliminate the inference if my understanding is correct.

 

[KingEddy]

Fyi, I'm pretty sure any 2" or greater lift via strut spacer will cause fit issues at the cv boot like @Gibson pointed out on page 6 here.

Procomp kit, pics on page 2, may have best chance at avoiding interference fit bc it gets more of its lift from perch collar than the small strut spacer in the kit.

The Procomp kit on page 2 is the one I am going with, it is also what the dealer recommended. Fingers crossed.

 

[AZSteve]

@AZSteve here are the before pics:

View attachment 1204View attachment 1205View attachment 1206
View attachment 1207
My apologies for the dirty truck, we have had multiple storms and very slushy roads.

Truck goes in tomorrow for the level. I will post similar photos tomorrow evening. Let me know if you want a different view.

When you take your truck in tomorrow, before you drop it off can you take a step back and get a complete side on view of the truck? not at an angle like your first pic. that is what I am most interested in. Stunning truck by the way, I got the same color, I love AMB! I take delivery a week from Saturday.

 

[kpkacts238]

I used a Pro Comp 2.5” level (62206) after reading other places that it will work on Tremor.

So far so good, no issues. Drive is the same. All tech features still work well.

 

[KingEddy]

When you take your truck in tomorrow, before you drop it off can you take a step back and get a complete side on view of the truck? not at an angle like your first pic. that is what I am most interested in. Stunning truck by the way, I got the same color, I love AMB! I take delivery a week from Saturday.

Here is the before stance:

Here is after the level kit:

 

[Cheif2Slo]

Looks Great KpKacts! You said it rides the same? Didn’t stiffen or harshen anything? If so that great news. I absolutely love the way the truck rides and have had bad experiences in the past ruining ride quality chasing suspension upgrades!

 

[jthomp343]

Here is the before stance:
View attachment 1255
Here is after the level kit:
View attachment 1256
View attachment 1257

Looks spot on. Keep us posted if there’s any issues!!

 

[Yeti]

Looks Great KpKacts! You said it rides the same? Didn’t stiffen or harshen anything? If so that great news. I absolutely love the way the truck rides and have had bad experiences in the past ruining ride quality chasing suspension upgrades!

I wouldn't expect any ride difference. My only concern would be full droop and that's only because of how I use my truck.

 

[AZSteve]

I am 100% convinced by these photos. I’m doing level level kit ASAP!

 

[kpkacts238]

Looks Great KpKacts! You said it rides the same? Didn’t stiffen or harshen anything? If so that great news. I absolutely love the way the truck rides and have had bad experiences in the past ruining ride quality chasing suspension upgrades!

Maybe slightly stiffer bounces going over large bumps. But really not anything else.

 

[JerseyMike]

Looks good although looks like you got about 3” of lift


I’m debating between 1/2” and 1.5” level from motofab because I like some rake but yours looks great