🛠️ What have you done to your F150 Tremor this week?

Was going to move my bag airlines into the pro power panel but broke one of these shitty screws on the back cover. Threw the builtrights on and I’ll deal with the other shit later. Kinda makes me want to rig up a harness to tie a LED strip into the bed lights 🤔

View attachment 29753
I know of a company bringing a plug n play harness to market soon to tie into the OEM bed light circuit 😉
 
I know of a company bringing a plug n play harness to market soon to tie into the OEM bed light circuit 😉
Well shit I guess I’ll just wait then…unless it’s OPT7 since I still haven’t seen a 21-24 tail light harness 🤣
 
Well shit I guess I’ll just wait then…unless it’s OPT7 since I still haven’t seen a 21-24 tail light harness 🤣
🤣🤣🤣 it’s not them! And it’s not me either. But it’s a good company. Just keeping them anonymous until they release it so i don’t mess anything up for them in case they get delayed.
 
Think we can get em to do some tail light harnesses too 😅
 
Few pics of my mods so far… autospring 2.3” level, with airlift 5000 ultimate bags and fox 2.0 shocks, raptor beadlocks with 1.5” spacers, ronin short antenna and 30% front tint. Still contemplating tires, had these on my old truck. Likely go with 35x12.5x17 Toyo at3.
 

Attachments

  • IMG_0044.jpeg
    IMG_0044.jpeg
    673.8 KB · Views: 72
  • IMG_0037.jpeg
    IMG_0037.jpeg
    622 KB · Views: 72
  • IMG_0038.jpeg
    IMG_0038.jpeg
    584.7 KB · Views: 74
  • IMG_0042.jpeg
    IMG_0042.jpeg
    785.9 KB · Views: 68
Order 3 is opening!!

If your interested shoot me a PM!
Bracket allows you to mount pod lights and light bars! It is a .25” piece of steel powder coated and shipped to your door!!
IMG_3790.jpeg
IMG_3719.jpeg
IMG_3755.jpeg
81ADEA47-1DDB-43E4-9EE4-05937571DE9A.jpeg
 
Finally got around to installing the skid plate to protect the catalytic converters. Painted with high temp matte black paint and a 15 minute install. Piece of mind.
 

Attachments

  • IMG_8677 Large.jpeg
    IMG_8677 Large.jpeg
    471.7 KB · Views: 59
  • IMG_8675.jpeg
    IMG_8675.jpeg
    490.2 KB · Views: 59
  • IMG_8681 Medium.jpeg
    IMG_8681 Medium.jpeg
    141.1 KB · Views: 59
  • IMG_8674 Large.jpeg
    IMG_8674 Large.jpeg
    251.3 KB · Views: 59
I know of a company bringing a plug n play harness to market soon to tie into the OEM bed light circuit 😉
Hmm I probably should've waited for this instead of tapping into the bed lighting wire last year... Oh well, what's done is done 🤣 it is awesome, though, having lighting around the whole bed when tonneau is covered. I'll take a pic tonight
 
Is there a thread on this? First Im hearing of this.
there is not. just some knowledge that i have through contacts i have from making my grille lights.
 
This is what I installed in my bed. I know I pulled off the back left tail light and tapped into the wires between the button and the factory bed lights. I don't remember how I hid the wires between lights :ROFLMAO: but there are 3 separate LED bars (I think technically they had an on off switch that I just left in the on position and use the button)

1000024178.jpg
1000024177.jpg
 
Looks much better. I have been pondering the same thing.
I designed some of my own, check them out in my posts. They are available from the business where I had them made. Let me know if you like what you see and are interested, I'll get you the contact info for the company.
 
Finally got around to adding/installing some stuff. Actually did the BD lights a couple weeks ago. Fox snap ring struts on second to top ring with a half inch moto fab spacers today. Which gave me 2-1/8 inch lift over stock. And still have 1-3/8 to 1-1/2 inch of rake. My UCA are barely missing or kissing the springs at full droop. But cv’s still turned smoothly. I’m sitting on the rear gen1 raptor shocks but am hesitant to install. Not real sure why. The front does feel more solid now but now the rear end feels more loose. Lol. And need to bolt down the tuffy lock box still also.
IMG_0370.jpeg
IMG_0372.jpeg
IMG_0268.jpeg
 
Finally got around to adding/installing some stuff. Actually did the BD lights a couple weeks ago. Fox snap ring struts on second to top ring with a half inch moto fab spacers today. Which gave me 2-1/8 inch lift over stock. And still have 1-3/8 to 1-1/2 inch of rake. My UCA are barely missing or kissing the springs at full droop. But cv’s still turned smoothly. I’m sitting on the rear gen1 raptor shocks but am hesitant to install. Not real sure why. The front does feel more solid now but now the rear end feels more loose. Lol. And need to bolt down the tuffy lock box still also. View attachment 29926View attachment 29927View attachment 29928
Looking good! How did you mount the lights?
 
Right after my last post I got my mind right and installed the rear shocks. Haha. RR was a breeze with the shipping strap installed. The LR was about an inch too long still. A bit of elbow grease got it in.
IMG_0373.jpeg
 
Right after my last post I got my mind right and installed the rear shocks. Haha. RR was a breeze with the shipping strap installed. The LR was about an inch too long still. A bit of elbow grease got it in. View attachment 29932
So whats the ride verdict on the front rear suspension change (ie. How do u you like, was it worth the price)? I'm ready to pick up the rear shocks you have, where did you purchase from and what was the shipping time?
 
  • Like
Reactions: DRJ

New Topics

Back
Top