🛠️ What have you done to your F150 Tremor this week?

[JTTremor]

Yes I did edit it! Thank you!

Nice, now I have to do mine. I just put mudflaps on my aftermarket fender flares behind the front wheels, so that alleviates some of my concerns about throwing rocks into my rockers.

 

[Lobo-Tremor]

Nice, now I have to do mine. I just put mudflaps on my aftermarket fender flares behind the front wheels, so that alleviates some of my concerns about throwing rocks into my rockers.

I'll just leave this here:
https://performanceparts.ford.com/download/instructionsheets/IS_M-16450-FSORB_28JAN22.PDF

 

[Highline9]

I'll just leave this here:
https://performanceparts.ford.com/download/instructionsheets/IS_M-16450-FSORB_28JAN22.PDF

Someone posted this in another thread

I'm torn on what looks better...Maybe a poll question, lol (The great RB debate of '25)

 

[K9.OPR8R]

KMC KM552 18x9+18 on my stock 33's
(Has a 2" readylift)

View this content on Instagram

View this content on Instagram

 

[ThunderClap]

They are pretty subtle. I wasn't sure about them from just looking at them online but wanted to give them a try. Glad i did! They look awesome!
View attachment 40925View attachment 40929View attachment 40930

Hey! Can't tell from the pic, did you go white or yellow for the light bar?

 

[K9.OPR8R]

Hey! Can't tell from the pic, did you go white or yellow for the light bar?

It is the M&R light bar. It is wired to stay on with amber running lights and lights up white with the auxiliary switch.

 

[ThunderClap]

For this past weekend I installed the grille light and the new BAK Revolver X4ts cover

View attachment 28286View attachment 28287

Are you still liking the x4TS? Ever put anything in the t slots?

 

[Drewberg11]

New to me and only a year old total, but really surprised how poor the chassis paint is. Nothing to have really worried about for now, but figured at this rate better to address sooner than later. Pain in the ass, and my back, but managed to take care of it in my driveway. Wire wheel on a drill, two rounds of Rustoleum rust dissolver and two coats of Eastwood rust encapsulator. Still want to tackle the interior frame coating soon.

 

[teamroper60]

F150LED side vent lights and Raptor style grill lights. Just got it back from Paint correction and ceramic coating today. Also Installed my M&R light bar.View attachment 40905View attachment 40906
View attachment 40935View attachment 40936

I just ordered those grille lights for mine.

 

[TwistedADV]

Added the Heads Up Display from F150LEDs. The cost of the Tremor - these should have been factory... Check out the quick install video.

 

[OKTREMOR25]

So there is a company that sells an orange 3m tape sized for your steering wheel that might fit the width of the red stripe. It was cheap and I haven't added it to my stock Tremor steering wheel but that might be a solution for you. I liked the idea of a center stripe on the wheel without breaking the bank for a Raptor replacement.

Did you get the standard orange or the matt orange ? is there a marked difference between the two?

 

[TwistedADV]

Did you get the standard orange or the matt orange ? is there a marked difference between the two?

I went with the matte orange.. no idea on the difference. I ordered this online so I couldn't compare the two. I can tell you that it matches well with the stitching

 

[OKTREMOR25]

I went with the matte orange.. no idea on the difference. I ordered this online so I couldn't compare the two. I can tell you that it matches well with the stitching

Good call TwistedADV: I added the matt orange and it is very close to the thread stitching, about as close as you can get.

 

[TwistedADV]

Good call TwistedADV: I added the matt orange and it is very close to the thread stitching, about as close as you can get.

Looks great!! I love it!!!

 

[MDK993]

Just tuned her! RTD+/5Star 91PRX! I would say I'm done with mods, but I need to get some A-Pillar Ditch lights next.
Was planning on Ford Performance tune, then JB4 and Pedal Commander. Had MPT Tunes in the past, however for the price couldn't pass up the RTD+ with 5Star also simple flash at the OBD, no PCM swap. No more complicated that the changes I've made with Forscan.

I recently picked up my 2022 Tremor 3.5L and am debating 5star or MPT. I had MPT on my last F150 and liked it. How has the 5star worked so far? Did it change anything with the transmission?

 

[Sniper1]

Finally got mine back from the body shop yesterday. So far have installed under backseat lock box, rear bumper step, fitcamx dash cam, upfitter extension cables and I guess you could say "installed" weather tech for mats.

 

[roxbury29]

I recently picked up my 2022 Tremor 3.5L and am debating 5star or MPT. I had MPT on my last F150 and liked it. How has the 5star worked so far? Did it change anything with the transmission?

The shifting is smooth, so far no issues with 5 star. Better throttle response, will light the tires up if you want it too. Normal driving is night and day better. I also had MPT on my last F150, just the cost savings this time was worth going with 5 star. When you want to pass someone there is no concerns and better fuel mileage with normal driving.

 

[NomadA32]

New to me and only a year old total, but really surprised how poor the chassis paint is. Nothing to have really worried about for now, but figured at this rate better to address sooner than later. Pain in the ass, and my back, but managed to take care of it in my driveway. Wire wheel on a drill, two rounds of Rustoleum rust dissolver and two coats of Eastwood rust encapsulator. Still want to tackle the interior frame coating soon.

Looks clean

 

[Brynn2023Tremor]

Installed RekGen mudflaps made in USA great build quality. Easy to remove if you want them just for the winter.

 

[AKTremor]

Nice, now I have to do mine. I just put mudflaps on my aftermarket fender flares behind the front wheels, so that alleviates some of my concerns about throwing rocks into my rockers.

Saw this a couple of months back couldn’t stop looking at it. Finally went ahead and added the front mudflats and swapped the boards over. Stood and looked and I have to admit that I like the new look better then I thought I would