🛠️ What have you done to your F150 Tremor this week?

[Deere_Farmer]

View attachment 22535
Brought home my first Ford ever. Always been a GM guy but my last silverado had the transmission issues and GM wouldn't stand behind. Hoping this F150 lasts me a LONG time!

You'll love your new ride.

 

[Rabidtastic]

don’t know how I feel about the bolts not being black but digging the Morimoto so far

 

[KewTremor33]

Ditto ~ take them out and paint them as this would have bothered me every time I looked at it. Like the Morimoto! 2 coats and 1 coat clear coat. (better yet Paint the extra (2) screws you didnt use and swap them out).

 

[Tempest]

Changed out the RAS system with an Airlift compressor and Firestone bladder… RAS wasn’t able to support the RV…

 

[Beachnuts]

Changed stock wheel wheel caps to black raptor style wheel caps. Picking up wheel well liners tomorrow.

 

[TexasTea]

Good thing the 10r80 has 0 issues, no TSB, and no class action lawsuits.....

Soooo. I just got a '21 that's still under warranty (and I'll be buying the ESP).... Is this an issue I can proactively address? It does have a clunk into 3rd on a cold start drive away.... What's the issue? Link to thread so we don't hijack?

 

[Cranbery]

Soooo. I just got a '21 that's still under warranty (and I'll be buying the ESP).... Is this an issue I can proactively address? It does have a clunk into 3rd on a cold start drive away.... What's the issue? Link to thread so we don't hijack?

Take to dealer. TSB 23-2250. There's a whole process. I'm going through it now - they reprogrammed and it didn't fix it. Taking it back to do the valve body, and I'm going to insist they do the drums too.

 

[bigwave_dave]

Too hot for bags but got the letters on finally

View attachment 21629

These look awesome! Can you drop a link, would love to add these to mine

 

[Rabidtastic]

These look awesome! Can you drop a link, would love to add these to mine

Ludesignsny - Etsy

Check out our ludesignsny selection for the very best in unique or custom, handmade pieces from our car accessories shops.

www.etsy.com

 

[Fozzy]

That's really cool. Can you send a link? The built in wireless charger is terrible.

Bucking Rabbit Co. | Unique. Handcrafted.

Unique. Handcrafted. USA Made products that fill the voids in your life. Premium Leather Stickers. Occupied Camp signs Leash Hangs

buckingrabbit.com

I just have the Amazon slow charger they recommend now. I plan on hard wiring a PD port in the bin and getting a better charger. The bin factory cover will not close with this in.

 

[JTTremor]

New RSI Smartcap!

 

[FatSacs]

Changed stock wheel wheel caps to black raptor style wheel caps. Picking up wheel well liners tomorrow.

Love that do you have a part number for those?

 

[FatSacs]

Had the entire front end of the truck and side pillars PPF’d. Pics don’t do it justice

 

[TexasTea]

Changed stock wheel wheel caps to black raptor style wheel caps. Picking up wheel well liners tomorrow.

Ditto. Drop the part numbers for these!

 

[typevii]

Raptor skid plate/cat protection. Ordered, delivered and then fitted. Very easy, twenty minutes to fit, and replaced the ‘nothing’ that Ford is fitting on the ‘23’s.

 

[King Luis]

Picked this up off of FB. I have never had a reliable charge from the built in charger. Since I am a iPhone user the MagSafe is awesome. The cover just lifts out if you still want to put stuff in there or get to the USB ports,


View attachment 22529

Link?

 

[Nomis 1]

Installed the center console divider and the six Diode Dynamics SSC2 Pro pod lights behind the grille. Four white combo beam and two yellow fogs. My son and i made the wiring harness, all six amber backlights together (will go on Aux 1) white lights in Aux 2 and the fogs on Aux 3 is my plan. I hope to get it wired up tomorrow, I'll add some "action" shots when I get them.

I copied an idea I got on this forum for the mounting solution. Used some aluminum sheet I had laying around to fab it up, quite easy to do and seems very sturdy.

I'll see how much the grille blocks the light, I may cut that portion of grille out and move the lights forward a few inches... but I would rather not.

 

[TJE]

Installed the center console divider and the six Diode Dynamics SSC2 Pro pod lights behind the grille. Four white combo beam and two yellow fogs. My son and i made the wiring harness, all six amber backlights together (will go on Aux 1) white lights in Aux 2 and the fogs on Aux 3 is my plan. I hope to get it wired up tomorrow, I'll add some "action" shots when I get them.

I copied an idea I got on this forum for the mounting solution. Used some aluminum sheet I had laying around to fab it up, quite easy to do and seems very sturdy.

I'll see how much the grille blocks the light, I may cut that portion of grille out and move the lights forward a few inches... but I would rather not.

Very interested in how those lights work out...

 

[Nomis 1]

Very interested in how those lights work out...

Me too....I didn't get the chance to finish the job today, going to have to wait till next weekend.

 

[Canineford]

Had the entire front end of the truck and side pillars PPF’d. Pics don’t do it justiceView attachment 22636
View attachment 22637
View attachment 22638

Looks good!
Side pillar posts have been a pet peeve of mine with F-150s. You look at them and they scratch. Why not offer a factory carbon fiber option for those that get off road, or even have limbs hanging over their driveways? I don’t get it.