Modular bumper install on 21-23 Tremor

[Diggman08]

The puck? No, no issues. Been on the truck since around 1000 miles, and I currently have 38,000 miles.

Ok thanks. Hey can you see that billet silver from fender well? They don't offer powder coated yet

 

[CrankCase]

No, you can’t see the spacer.

 

[Diggman08]

No, you can’t see the spacer.

Ok thanks and did you use those alignment brackets that came with? I'm not sure what they actually do. None of the other level kits come with those

 

[CrankCase]

Ok thanks and did you use those alignment brackets that came with? I'm not sure what they actually do. None of the other level kits come with those

They are getting the lower control arms into spec for alignments. The shop that did my install did use them, and my alignment guy at my dealership said it was nice to have to make the alignment spot on.

 

[Diggman08]

They are getting the lower control arms into spec for alignments. The shop that did my install did use them, and my alignment guy at my dealership said it was nice to have to make the alignment spot on.

Nice! Seems like that makes ready lift a step above the others just from that aspect.
Do you know if yours has the offset and tremor specific or just for all f150

 

[CrankCase]

They are tremor specific.

 

[Diggman08]

They are tremor specific.

Does anyone actually know what makes them Tremor specific?

 

[BillfLang]

Hi all - New here. I have a 2023 3.5 EB and need a winch. I like this. Can someone help me with the parts? Does this winch set-up require re-location of the intercoolers? Thanks

You should from what read.

 

[Cblaxx19]

I’ve started my journey!

 

[SpaceWhiteF150]

Let’s gooo

 

[CrankCase]

Going to leave it silver? Or have it painted? Line-X wouldn’t be bad either.

 

[Cblaxx19]

Going to leave it silver? Or have it painted? Line-X wouldn’t be bad either.

I’m debating color matching the silver to leadfoot.

 

[CrankCase]

I’m debating color matching the silver to leadfoot.

Good call. I think the center section looks best color matched, and the wings left the charcoal gray, they match the OEM wheels and grill pretty well.

 

[Rabidtastic]

I’ve started my journey!
View attachment 38698

Are you gonna be able to retrofit sensors?

 

[Cblaxx19]

Are you gonna be able to retrofit sensors?

That’s my plan!

 

[TexasTea]

Couple more pics for you guys.
I did find a company that makes custom rubber filler pieces that I’m going to have make something for the bumper/valance area. The foam is ok, but not a finished look. On the black truck, it’s hard to notice it but I feel on a light colored truck it might be more of an eye sore.
View attachment 32893
View attachment 32894
View attachment 32895
View attachment 32896

Hot damn why am I just seeing this now. Looks awesome. I need a takeoff bumper YESTERDAY

 

[Shall3604]

Do the 24 Fogs on the modular bumper work with the 21-23? (I am assuming no if you @Cblaxx19 have to retrofit?)

I have a 22 402A with the front sensors and I am thinking this may be a more difficult swap than if it was with a 401A.

 

[beo_tom]

That’s my plan!

Which modules are you missing, if any? IPMA? Or is simply getting the sensors and harness and flipping some switches in FORscan?

 

[Cblaxx19]

Do the 24 Fogs on the modular bumper work with the 21-23? (I am assuming no if you @Cblaxx19 have to retrofit?)

I have a 22 402A with the front sensors and I am thinking this may be a more difficult swap than if it was with a 401A.

i just have no interest in the dinky factory fogs that come on the 24+ trucks. so i'm planning to make my own brackets to mount Diode Dynamics pods in. its probably not a plug n play situation to use the 24 fogs on a 21-23 truck though since the connector is likely different since 21-23 have DRLs and the 24 does not.

Which modules are you missing, if any? IPMA? Or is simply getting the sensors and harness and flipping some switches in FORscan?

per a thread on the 14thgen forum, i should only need a harness and the sensors themselves. im sure im going to have to do some digging to get them working.

 

[Shall3604]

i just have no interest in the dinky factory fogs that come on the 24+ trucks. so i'm planning to make my own brackets to mount Diode Dynamics pods in. its probably not a plug n play situation to use the 24 fogs on a 21-23 truck though since the connector is likely different since 21-23 have DRLs and the 24 does not.

Keep us (me lol) posted on the brackets and the pods! I am interested in doing this to my 22! I do agree that the fogs are very meh.

I think the dynamic bending are a bit better than the reflectors for sure. I upgraded my 401 to a 402 and not sure if I would spend the extra $$$ for DD headlights and lose the bending.