What's new
By:

🛠️ What have you done to your F150 Tremor this week?

I had the Borla S Type on my 2017 Focus RS. Best of both worlds. Quiet when easy on the gas, but it really wakes up when I tromped on it and went into boost. It's basically the Ford Performance Exhaust which Borla makes. I'm giving it some thought on putting one on my '25 Lariat which has the 5.0 Coyote.
 
TheWaterman said:
Has anyone installed the TufSkinz bed lettering on their Tremor?

tufskinz.com

Tailgate Letter Inserts Fits 2021-2026 Ford F-150Pro Access Tailgate / *OE Color - Tremor Orange

Official Ford Licensed tailgate letter inserts for the 2021-2026 F-150. Raised, domed, stylish F-150 lettering in durable materials with easy 3M adhesive install.
tufskinz.com tufskinz.com

How hard was it to apply and line everything up?
Click to expand...

Yes….very easy.

IMG_1572.webp
 
TheWaterman said:
Has anyone installed the TufSkinz bed lettering on their Tremor?

tufskinz.com

Tailgate Letter Inserts Fits 2021-2026 Ford F-150Pro Access Tailgate / *OE Color - Tremor Orange

Official Ford Licensed tailgate letter inserts for the 2021-2026 F-150. Raised, domed, stylish F-150 lettering in durable materials with easy 3M adhesive install.
tufskinz.com tufskinz.com

How hard was it to apply and line everything up?
Click to expand...
I don't know if it was 'easy' like t-rob said, but not too bad (depending on how much crown you have while installing I guess). I was more worried about not getting the alignment...with pretty pricy stickers...Don't regret a thing, and have held up very well (even in TX heat).STICK 1.webpSTICK 2.webpSTICK 3.webp
 
Thanks fellas. I've done some limited decal work before. Seems like you just need to make sure everything is clean and then take your time.
 
T-Rob said:
Exactly. Like I said, it's pretty easy. Not rocket science by any means. LOL
Click to expand...

I'm more of a nuts and bolts guy lol. Ask me to change out an alternator, I'm your guy. Ask me to paint/decal/detail/sculpt/carve...it comes out looking like Helen Keller did it.

(Hope that doesn't offend anyone lol)
 
TheWaterman said:
Has anyone installed the TufSkinz bed lettering on their Tremor?

tufskinz.com

Tailgate Letter Inserts Fits 2021-2026 Ford F-150Pro Access Tailgate / *OE Color - Tremor Orange

Official Ford Licensed tailgate letter inserts for the 2021-2026 F-150. Raised, domed, stylish F-150 lettering in durable materials with easy 3M adhesive install.
tufskinz.com tufskinz.com

How hard was it to apply and line everything u
Click to expand...

TheWaterman said:
Has anyone installed the TufSkinz bed lettering on their Tremor?

tufskinz.com

Tailgate Letter Inserts Fits 2021-2026 Ford F-150Pro Access Tailgate / *OE Color - Tremor Orange

Official Ford Licensed tailgate letter inserts for the 2021-2026 F-150. Raised, domed, stylish F-150 lettering in durable materials with easy 3M adhesive install.
tufskinz.com tufskinz.com

How hard was it to apply and line everything up?
Click to expand...
Went on easy. Still looks good after a year,no fading,cracking.
 

Attachments

  • 20250602_154900.webp
    20250602_154900.webp
    312.9 KB · Views: 41
TheWaterman said:
I'm more of a nuts and bolts guy lol. Ask me to change out an alternator, I'm your guy. Ask me to paint/decal/detail/sculpt/carve...it comes out looking like Helen Keller did it.

(Hope that doesn't offend anyone lol)
Click to expand...

Gotcha. Just clean the tailgate, peel the sticker off the back of the letters and slow put them on.
 
Picked up two new tires for the front to match the back tires (recently replaced under road hazard). Treads were just a little too low on the front to be comfortable using 4A.

Upgraded my mirror dashcam from the Wolfbox G850pro to G900Pro. The 2.5k rear camera was worth it. Nighttime driving also seems a bit clearer with less headlight blur (in the rearview).
 
CMar said:
Picked up two new tires for the front to match the back tires (recently replaced under road hazard). Treads were just a little too low on the front to be comfortable using 4A.

Upgraded my mirror dashcam from the Wolfbox G850pro to G900Pro. The 2.5k rear camera was worth it. Nighttime driving also seems a bit clearer with less headlight blur (in the rearview).
Click to expand...
The G900Pro is amazing! I love mine. Great choice!
 
After passing by an idiot a few days ago who showered my truck with debris while apparently tilling his ditch for crops with a string trimmer (weed eater) I went ahead and added a Husky Aeroskin hood protector today.

My wife originally thought it would make the truck look too "grandpa" but she conceded later that it almost wasn't noticeable.

i-9wRzfNR-X2.jpg
 
Whiskey Bizness said:
After passing by an idiot a few days ago who showered my truck with debris while apparently tilling his ditch for crops with a string trimmer (weed eater) I went ahead and added a Husky Aeroskin hood protector today.

My wife originally thought it would make the truck look too "grandpa" but she conceded later that it almost wasn't noticeable.

i-9wRzfNR-X2.jpg
Click to expand...
Great Grandpa move!! Looks great!! After seeing this pic this Grandpa is ordering!
 
Whiskey Bizness said:
After passing by an idiot a few days ago who showered my truck with debris while apparently tilling his ditch for crops with a string trimmer (weed eater) I went ahead and added a Husky Aeroskin hood protector today.

My wife originally thought it would make the truck look too "grandpa" but she conceded later that it almost wasn't noticeable.

i-9wRzfNR-X2.jpg
Click to expand...

Yeah, I was a bit worried about putting it on...thought it might look out of place, but after I installed it I was really happy with it.

IMG_1705.webp
 
Just installed the Flowmaster Flow FX...really diggin' it! My 5.0L now sounds like it should! Not too obnoxious or too loud...just right.
 
Whiskey Bizness said:
After passing by an idiot a few days ago who showered my truck with debris while apparently tilling his ditch for crops with a string trimmer (weed eater) I went ahead and added a Husky Aeroskin hood protector today.

My wife originally thought it would make the truck look too "grandpa" but she conceded later that it almost wasn't noticeable.

i-9wRzfNR-X2.jpg
Click to expand...
Installed the husky hood protector some time back now. Only negative I found was the small bit of hood color that shows at the bottom edge if i installed on a light colored truck as I have. A couple/few passes with a chisel point Sharpie and I find it looks/blends far better. I reapply Sharpie as needed.
husky.webp
husky1.webp
 
TremZilla said:
Installed the husky hood protector some time back now. Only negative I found was the small bit of hood color that shows at the bottom edge if i installed on a light colored truck as I have. A couple/few passes with a chisel point Sharpie and I find it looks/blends far better. I reapply Sharpie as needed.
Click to expand...
AHHH... so we didn't screw up after all. 😄

Ours has that little line of visible paint too and I just chalked it up that we allowed it to slip slightly as we were installing it.
 
Does this just protect the leading edge of the hood or redirect the airflow so rocks go over the hood/windshield?
 
You must log in or register to reply here.
F150 Tremor Forum Favs 👍 View All

F150 Tremor Forum Photos

Recent Discussions

Back
Top